Question about Miele s558 Silver Moon Vacuum

1 Answer

Will stop running for no apparent reason. The light stays on and you can amp up the power to restart, but the problem is persistent. The book says to change the filters, which has been done.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 438 Answers

Greetings from GoVacuum,

This problem is caused by the static electricity which causes the hose controls to jump back down to the off setting. I have seen this issue on several Silver Moon and Blue Moon models before.

The only way to fix this problem is to purchase a brand new, redesigned hose. The new hose can be purchased here; Miele Electric Hose Miele Part # SES 125 .

In fact, I'm so sure that this new hose will fix the problem to your Miele, that if you do purchase the hose from GoVacuum, we'll give you a 60 day satisfaction money back guarantee. If this hose doesn't fix your problem, you may return it to GoVacuum within 60 days for a full 100% refund, no restocking fees or shipping charges will be deducted. We'll even include a free return label you can use to return the hose to us at our expense!

If you have any questions, please feel free to send me an email, or request a clarification. I hope this helped you. If you found this solution helpful, please remember to rate this solution as helpful by clicking on the four THUMBS UP icons in the top right hand corner of this solution.

Thanks so much,

Chris Jones
GoVacuum.com

Posted on Mar 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dyson will turn on but not stay on


My bagless vacuum stopped working for no apparent reason, it was only when I checked the dust container that I found that the tube leading to the dust container was blocked and there must be a cut out that stopped the motor running when the tube was blocked. So look at the dust container and all the pipework you can check to see if any are blocked. I hope this is the problem and it is easy to fix.

Nov 02, 2014 | Dyson DC25 Animal Bagless Upright Vacuum

1 Answer

Lights on front of unit stopped working and a little while later the whole unit stopped working while in the middle of vacuuming


Take it to a qualified repair facility. Even as there isnt to much to a vacum let the tech check it out. Could be a faulty switch or controls. I dont think its a serviceable by homeowner problem.

Dec 20, 2013 | Kenmore Vacuums

1 Answer

Hoover S3765


If you light and nozzle motor both go off at the same time, you might have a bad power cord. Mine had this problem which I could verify by jiggling/twisting the cord near the strain relief on the nozzle. It would go on and off as I did this. The cord is cheap to replace, around $13 for the part shipped. Part number is 59134072.

May 30, 2012 | Hoover S3765-040 WindTunnel Bagless...

1 Answer

Check filter light stays on


1) Recharge the batteries indicating that need recharge.

2) Stay to cool, because is a signal to overheating proceed according.
if the problem persist get support online with the supplier
God bless you

5_10_2012_12_41_06_pm.jpg

May 09, 2012 | Electrolux EL8502B Upright Vacuum

1 Answer

Power switch won't stay on. If I hold it down the power stays on. As soon as I let up, it stops.


Most likely the ratchet mechanism on the switch is faulty.

Switches are available if you search on eBay for a few pounds, and if you've reasonable DIY skills and tools, it's fairly easy to do.

Have a look at http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html which has some great info.

Feb 16, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

2 Answers

Power Unit VX475 Stops


Checked and found that motor is definitely overheating for unknown reason. Since power unit is still under warranty, solution was to contact local service company for NuTone power unit and have them come out and fix/replace it free of charge.

Jun 27, 2008 | Broan-NuTone VX475 Bagged Central System...

1 Answer

Kirby G3 won't run


sounds like brushes not being pressed down to the commutator shaft. pull out brushes and clean the brass brush guides and then apply a light coat of grease to brushes. however, what exactly do you mean by "the fan is OK"?

May 29, 2007 | Kirby Generation 3 Bagged Upright Vacuum

Not finding what you are looking for?
Miele s558 Silver Moon Vacuum Logo

Related Topics:

556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Mack Baxter

Level 3 Expert

381 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Miele Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...