Question about Mitsubishi WD-65C9 65" DLP HDTV

1 Answer

I replaced the bad lamp in my Mitsubishi TV. I have my picture back, but now the picture blinks in and out occasionally and I'm wondering why.

The original problem was that we had sound but no picture. After using the diagnostic feature, I got the code for a bad bulb so I replaced it. When I turned it back on, I had the best picture ever but with the white dots everyone talks about. Within seconds, my screen was filled with them. then the picture starting going in and out to the point I thought it was about to explode or something. I turned it off, waited a minute, and turned it back on and the white dots were gone. It continued to go in and out for several minutes, but that eventually stopped. Every few minutes it will still go dark on me for a few seconds and then come back and I don't know why. The picture quality looks amazing and the white dots are gone so I don't think it's the chip. could it simply be a loose connection? What else should I look into?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 192 Answers

Check for capacitor burned out and replace it

Posted on Sep 02, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitzibushi Tv model WD-65638 no picture no sound


Youre lamp has failed. you need to replace the lamp. Refer to the manual to see how to replace it. It only requires 2 or 3 screws on the back to be removed. Please check the manual.
You need a 915B441001 lamp. 915B441001 PVIP Mitsubishi DLP TV Bulbs

Feb 25, 2015 | Mitsubishi Televison & Video

1 Answer

What does the yellow blinking light mean on Mitsubishi WD65837


Hi,

Here is a whole list for you :

Mitsubishi Blinking Codes :

Constant Green - TV is Powered On
Constant Red - Lamp Failure
Constant Yellow - DMD temp is very high
Blinking Yellow - Lamp cover is open
1 Red Blink, 6 Yellow Blinks - Color Wheel Failure
3 Red Blinks, 4 Yellow Blinks - Lamp Failure
3 Red Blinks, 6 Yellow Blinks - Exhaust Fan Not Working
3 Red Blinks, 7 Yellow Blinks - DMD Fan is not rotating
5 Red Blinks, 7 Yellow Blinks - Ballast Problem
6 Red Blinks, 6 Yellow Blinks - Lamp Missing, Bad Cable between lamp and ballast

And the Lamp cover must be here somewhere in your TV :
8a100447-77fc-441c-85ee-28a376a2e37f.jpg

For more you can refer to the below link :
Mitsubishi DLP TV Blinking Code Errors Explained Overview of Each...

Jul 07, 2014 | Mitsubishi WD 65837 65 in. HDTV

1 Answer

I installed a new lamp and the tv is still blinking saying the lamp is bad. There is no picture.


its most likely the ballast which is causing the issue. The ballast is what provides the power source to light the lamp. You can get the ballast at www.tvrepairworld.com and they can provide instructions on how to replace the ballast

Mar 31, 2013 | Mitsubishi WD-73733 73" HDTV

1 Answer

Mitsubishi projection T.V


check the lamp first to see if intact or shattered.

Mar 31, 2012 | Mitsubishi Televison & Video

1 Answer

The picture flickers occasionally. I am wondering if the bulb is going.


The WS-55809 is a rear projection TV and does not have a bulb, it has 3 picture tubes. DLP and LCD Projection sets have bulbs, or mercury vapor lamps. Does your picture flicker equally with different inputs?

Sep 26, 2011 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

No picture or sound mitsubishi 62525


Capacitor failure is the most likely scenario the FMT ans Signal PWB would cause the picture interference and the power pwb would cause the lamp light to turn red and give a 34 code when the device/ input and menu buttons are pressed in together and held for five seconds. That chassis has issues with every board in the chassis having failed capacitors you can get repair kits for the V26 chassis at the follwing link that come with instructions. Your model is the V26 chassis. Heres the link.
http://servicemanuals.vstore.ca/

Jan 25, 2009 | Mitsubishi WD-62525 62" Rear Projection...

4 Answers

Mitsubishi WD-62525 timer light keeps flashing after lamp replace


There is a tiny reset button to the left of the timer light. Press with a pin or something small, wait 60 seconds. Viola!

Dec 29, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

No power


if the lamp is bad. it will blink.dont worry make sure you put screws back and cover on there are protection switches.If still blinks after bulb replaced and cover on. it is the thermo fuse on or near bulb, Then after that it get complicated

thanks DOCTOR VIDEO

Apr 28, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Blinking Green Light on Mitsubishi DLP 52525


No problem, do self diagnosis test, read threads here or goto ctechnicians.com get error codes first and get back with me.

Dec 17, 2007 | Mitsubishi WD-62825 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-65C9 65" DLP HDTV Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1255 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...