- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Almost all pc are wired the same way make sure you rob your hands in the chassis so you don't burn the motherboard. all the connection should fit according to the socket that goes connected do not alter or break any locks it should fit the way it was designed to fit...tekgods.com
The reset button is on the back between the power supply and the ethernet connectors. You press this and follow the prompts on-screen. You'll have to read the manual intro to see how to connect to the screens.
Open INTERNET EXPLORER and. (In the URL address field), enter the IP address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "220.127.116.11" as the address. This is usually the default IP address for most routers.do not type "www" just the number Enter the username and password for your router. This should also be supplied in the router's manual. If you don't have this information, go to routerpasswords.com and find the brand and model of your router. This site lists the default login information for most wireless routers you can try "ADMIN" for user name and "PASSWORD" for passsword. You should now be able to see your wireless router settings. You can configure your network ports, as well as SSID (wireless network name) and passwords.aka security key
If this was helpful, please indicate so, if not -comment back so we can dig further to resolve this.
If you didn't change anything in modem side, that means the modem is still connected to internet. in this case you can connect the modem to your computer via the Ethernet cable. with this cable you will not need to install anything on your computer, just plug the Ethernet cable to the RJ45 port and start browsing internet.
The only case when you will need the drivers is when you want to connect the modem to your PC via USB cable.
Here is a link where you can find everything about your modem: quick guide, user manual, usb drivers ...
your problem is how to connect your mode, i'm sure that your motherboard is latest, all design for internal modem are in the PCI slot, but if your using external modem in USB or COM1 & COM2... all kinds of motherboards design are have this peripherals...
call ur ISP ur singnal is droping they will send a tech to inspect the lines
make sure u dont have ur modem on the grown near speakers monitor or on PC tower make EMI electro magnetic interferance
will make you have intermittent signal but probably not the case
95% sure its a line issue
Try this Site, and Request a Manual for This (which is an Old Manual): http://www.skutchelectronics.com/old_manuals.htm Check these folks out, If you don't get what you need get back to me, as I may have another Link for you. Good Luck