How to fix touch pad? - Frigidaire FAH106R1T Thru-Wall/Window Air Conditioner

reinstall the driver, if the touch pad has a massive wear then replace the entire touch pad.

some touch pads have a tap to turn off, and a double tap to turn back on... also check you F keys.

about the only thing you could do is to replace the touch pad there are no repairs done to touch pads we basically just install a new one i suppose one could take one apart and try to fix it but there are no schematics that they give to the touch pad make sure before ordering a new touch pad that it is the touch pad and not the control board that has malfunctioned if you are unable to perform these tests please call a repair technician if you have any further questions please message me back and please remember to rank how this opinion has helped in your appliance situation Thanks again
Rick

that is a bummer for to fix it you have to order the whole top cover and replace it. for some reason the touch pad is broken from under neath and will now not work. I have had to place some of them. to fix it tempery take off the key board and unplug the touch pad and us a reg mouse.

Hi,

the touch pad of your phone is faulty it needs to be replaced.

To replace the touch screen, you need to get a new touch pad.

When you purchase the new touch pad,you have to loose the phone to gain access to the faulty touch pad.You will needing a soldering iron to replace the touch pad.

If you do not have the technical know how of fixing the touch pad, i would advice that you give it to an expert so that you will not damage anything further.

Have a nice day.

Hi there
Heres the codesfor you and hope this helps and let me know.
F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information. F7 Function key shorted or stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).
Thank you for writing to fix ya.
Best regards Richard

HI. this is a code that represents a failed key pad or touch pad membrane board. replacing this failed touch pad will fix this issue. This touch pad board is separate from the actual control board.

Hi this will happen when the touch pad circuits become unstable and damaged, due to abundant usage or , old age.

simply replacing the touch pad will fix this issue.

there is no setting for the touchpad. it is set at the factory with hardware components under the touchpad.

Look along the top of the keyboard for an "f key" that shows a "touch pad" icon, IF you see it, press the "function key" (along the bottom of the keyboard) PLUS at the same time the "f key" (that you found along the top) and that should "toggle" the touch pad back on....
Also, IF you plug in a USB mouse that will allow you to move the cursor around--but the USB mouse doesn't fix your touch pad problem.
Hope this helps.