Question about Electrolux Boss Smart 12A Vacuum Vacuum

1 Answer

Electrolux "The Boss" 4110 Vacuum - Have to hold power button?

I have an Electrolux "The Boss" 4110 vacuum cleaner.

Since a few days ago, it will only work if I constantly hold down the large ON/OFF button, when I do this everything else works on it, the suction etc is perfect.

Any suggestions as to what might fix this fault if I open it up, or what part I might need?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 38 Answers

It sounds like the on off Switch is broken.
you need to replace it or tape/glue it down and use the plug as on of switch.

Posted on Jul 12, 2009

  • Keith Eldridge Jul 11, 2011

    The switch may be OK as in my case. I discovered that the plastic "tube" that pushes down on the switch seemed to have worn down so that it was not pushing the button down far enough for it to latch.
    I fixed it by inserting a thin-headed screw into the end of the tube thus extending its length slightly. I packed the screw thread out with plastic tape to prevent it from falling out.
    Bit of a so and so to dismantle though. Don't bother with the visible screws: There are 2 lugs each side of the centre speed control section which can be dis-engaged when the adjacent buttons are depressed fully. Once the centre section is released and unplugged, the button section can be removed.
    A bit of silicon furniture polish does wonders if the buttons are scraping the case.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace el8602a power cord


Electrolux Vacuum Cleaner EL 8602A How to replace the ...

www.manualsonline.com/.../vacuum.../how-to-replace-the-power-cord-o...
Question About Electrolux Vacuum Cleaner EL 8602A. How to replace the ... How toreplace the power cord on Electrolux EL8602A. Asked by gerry nickel on ...

Rewiring the Power Cord for the Electrolux Model G ...

? 4:27
https://www.youtube.com/watch?v=4uqNa7mVBO8
Jan 30, 2012 - Uploaded by Jayson1940D14
Rewiring the Power Cord for the Electrolux Model G ... How tochange the Electrolux 725 Suspension Plate - And Get Access To The Motor ... Brown Vintage ELectrolux Canister Vacuum Cleaner 1401-b - Duration: 0:17.

Electrolux Nimble Upright Vacuum, EL8602A - YouTube

? 3:49
https://www.youtube.com/watch?v=-anwdD4fK-o
Nov 11, 2014 - Uploaded by Michael Callender
Electrolux Nimble Upright Vacuum, EL8602A Best Price ... Dirt Devil UD70095 Power Reach Multi Cyclonic Pet Bagless Upright - Duration: ...

Jan 30, 2016 | Vacuums

1 Answer

Electrolux VACUMM CLEANER LITE II


get new bag filter , empty dirt out to garbage bag , clean hose .

Dec 26, 2013 | Vacuums

1 Answer

Vacuum shuts off


You may need to change the thermostat which can be found at evacuumstore.com

Nov 22, 2013 | Electrolux Eureka Boss SmartVac Vacuum...

1 Answer

How to replace the belt on a 4703 Electrolux vacuum


Instructions for changing the belt are found on page 20 of the manual (4700 series). A downloadable, printable manual is found at the below site.

http://dl.owneriq.net/b/b7517422-db37-404e-9da2-d898185942e5.pdf

Mar 09, 2011 | Electrolux Eureka Boss SmartVac Vacuum...

1 Answer

My vacuum cleaner will run for a few minutes and then shuts off. The plug light on the panel blinks. I thought the motor was shut, but after a long time it will turn on again, but again, only for a few...


I know nothing about your particular vacuum, but many vacuum cleaners these days have
safety cut out's, which causes the motor to do exactly what you describe. Sadly blockages, faulty switches, over stretched cables, carbon brushes etc could also give similar symptoms, so sounds like a job for the repairer on this occasion. Get a quote first if you can.

Feb 06, 2011 | Electrolux Epic 6500 Vacuum

1 Answer

Model of BAg?


HI Your Exlectorlux uses Electrolux Style OX bags. Here's a few links back to our website to several different style of bags that will fit your Electrolux:

Genuine Electrolux Vacuum Cleaner Bags for Harmony Canisters

Generic Electrolux Style OX Vacuum Cleaner Bags for Harmony canisters

Hopefully this helped you! Please be sure to rate my repair helpful, or leave feedback if this was able to answer your questions.

Thanks,

Chris Jones
GoVacuum.com

May 02, 2010 | Electrolux Harmony Canister Vacuum -...

1 Answer

I have an Electrolux Vacuum Cleaner. It is an


The OEM part number is 45853 if you go to the Aerus/Electrolux store. Other vacuum shops should have the part. it fits other brands.
Joe

Nov 15, 2009 | Electrolux EL1000A2 Pronto Bagless Stick...

Not finding what you are looking for?
Electrolux Boss Smart 12A Vacuum Vacuum Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Marvin
Marvin

Level 3 Expert

81294 Answers

Chris Nomland
Chris Nomland

Level 2 Expert

115 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...