Question about Televison & Video

1 Answer

Hitachi TV HiI have a Hitachi TV with built in Digital, everything was fine for a few months but now the TV has stopped responding to half the controls on the remote, I can switch to Digital from terrestial using the remote and other screen functions work but I have no remote channel movement control or volume control or even just to call the Menu up. They work if I manually use the TV functions but not remotely.

Posted by on

  • Sbstceo Dec 01, 2007

    I have recently experienced the same problem. A certified repair tech has determined that it is there is a problem with the Digital Control. They need to replace the digital sub printed circuit board. We're still waiting on the part. Has anyone else seen this problem. I don't want to wait weeks for the part only to find out it does not resolve the problem.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

If your remote transmitter is multifunction, such sa TV; DVD; and VCR operative; You may be in the wrong mode. Press the TV function first and then try to change the volume. If you still have problems, the remote may be defective.

Posted on Nov 15, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv problem


hii actualy I just want to confirm tht my tv is powering off after every 10 minutes I tried bt I didn't find any reason

Sep 08, 2012 | Hitachi Used Original L55S604 Remote...

3 Answers

Vizio gallevia no picture


I EMAILED VIZIO ABOUT MY PROBLEM. THEY RESPONDED IN 3 DAYS. THE TECH AND I THEN TRADED A COUPLE OF EMAILS. HE CONFIRMED THE INFO ABOUT THE TV WITH ME. HE EMAILED ME THE SOLUTION TO THE PROBLEM AND PART NUMBER. IT WAS THE MAIN BOARD. I ORDERED THE PART AT VIZPARTS.COM FOR ABOUT 180.00. INSTALLED IT MYSELF AND THE TV WORKS FINE. I WISH IT HAD BEEN UNDER WARRANTY BUT IT WAS 18 MONTHS OLD AND THE WARRANTY WAS FOR 12 MONTHS.

Jan 03, 2009 | Vizio Gallevia GV42LF 42 in. LCD...

1 Answer

Remotes no longer work


I had this exact same problem. After a week or so it started responding to the remote control again. Then after a couple of days it stopped responding. This problem came and went for about a month, then one day the entire TV went dead. When I powered it on, the green light appeared for 2 seconds followed by a sequence of 6 flashing red lights that repeated. I brought my set in to a repair shop and they replaced the power supply board. That fixed the problem and now the TV powers up and responds to the remote control again. Total charge was $250. That was very disappointing for a $1,500 TV that was only 18 months old. I'm going to let Philips know how disappointed I am in their product!

May 28, 2008 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

My Sharp Aquos TV has stopped responding to remote control(s)


Unplugging my TV for 15 seconds (longer actually - at least a minute) made the remote and the satellite TV remote both work again with the TV.  Thanks for the tip!

May 14, 2008 | Televison & Video

1 Answer

Remote problems


Take the remote to your local Radio Shack and have it tested.. They used to carry IR cards and now have a pen-like tester that can tell if the remote is operating properly. Then, if you're sure the code is correct, you probably will have to have the IR detector in the Tv replaced...
Bill

Nov 20, 2007 | RCA RCU300WBL Remote Control

1 Answer

I have a 50 inch hitachi ultravision that has no picture or sound but power light is on


you have lookse connection on the video convergance amp ic

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 04, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Remote Doesn't Work for TV, but Works for TV


You might have lost the code from the remote which identifies the tv to your remote. If you have the manual that came with the remote you might try entering the code again. ( reprogram the remote). Stargazer

Feb 26, 2007 | Hitachi 32CX7B * 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75276 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5379 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...