Question about JVC Televison & Video
This is usually down to a lose fittning scart socket or AV cable. Try setting it up again to see if this helps!
Posted on Jul 12, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: sony dvp ns50p dvd player
If you are using the s-video jack to connect the DVD to the TV, the jack could be loose or the wire could be bad. The s-video cable has 2 signals, the black-and-white (luminance) and the color (chroma). If the chroma signal is not getting through, the picture will be in black and white.
Posted on Sep 01, 2007
SOURCE: dvd player not showing color
you are only having porblem with your color system. if you are using a multi system DVD player then see if it is properly selected to your region. in USA it should be NTSC 3.59, if you're in Europe it should be PAL. if you're using your DVD via a DSP or audio systems, check also the color system of the amplifier, it should be adjusted to your color system.
Posted on Mar 31, 2008
Make sure the connection to the TV is correct. Yellow(video) jack from the DVD player will go to yellow jack of the TV, white to white(audioL) and red to red(audioR) for compsite audio/video connection. Red to red, green to green and blue to blue for component connection.
Posted on Dec 29, 2009
Testimonial: "thank you!!!!!!! that was it. hehe...."
Tips for a great answer:
Jan 21, 2010 | Cyberhome CH-DVD 300 DVD Player
Jan 07, 2010 | Toshiba SD-2800 DVD Player
Jul 04, 2009 | Coby DVD-536
Jan 04, 2008 | Disney 13" TV
Sep 01, 2007 | Sony DVP-NS50P DVD Player
Aug 06, 2018 | JVC Televison & Video
150 people viewed this question
Usually answered in minutes!