Question about Maytag Neptune MLG2000A Front Load Stacked Washer/Dryer

2 Answers

Maytag washer model #LAT9205AAE

I HAVE A MAYTAG WASHER WHEN MY WIFE WASH A LOAD OF CLOTHS, AFTER THE CYCLE FINISHES THE CLOTHS ARE STILL WET, IT DOESN'T RING OUT THE WATER FROM THE CLOTHS COMPLETELY, SOME ONE TOLD ME IT COULD BE THE BELT COULD BE LOSE, AND ONE PERSON SAYS IT THE CONTROL TIME ABOVE, I'M CONFUSSED,PLS LET ME KNOW THE PROBLEM.

THANX FOR ALL YOUR HELP, SHOW

Posted by on

  • Anonymous Dec 08, 2007

    Check outhttp://www.maytagfrontloadsettlement.com... This sounds like the same problem many other Maytag customers have encountered (including me).

  • Anonymous Mar 18, 2014

    clothes still too wet

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Could either be the settlement issue, or it could be a clogged control valve. Turns out that this washing machine is very sensitive to certain kinds of soaps and if you use a detergent that is too dense or use too much, over time, your valve will become clogged and need replacement.

By the way, on the lawsuit, Maytag takes a firm stance on any new claims as they did specify an expiry date to take claims. I escalated to senior management at Westinghouse and did get an evaluation done by one of their partners. The problem was not related to the lawsuit issue. The only problem was that the repair company they had sent, didn't call back to re-schedule so I gave my business to someone else.

Good luck!

Posted on Dec 18, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Check out http://www.maytagfrontloadsettlement.com. This sounds like the same problem many other Maytag customers have encountered (including me).

Posted on Dec 08, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a maytag centennial washer MVWC400XWO it is 3 years old. The washer has stopped after the initial wash cycle leaving the cloths wet in a tub full of water. The washer will not go to the spin/drain...


For saftey the lid lock and lid down switch must be activated before the machine can advance to the next cycle. This has been the sequence for all top loaders..

Check the switch for the lid it is likely defective.

Make sure that the power is removed.

Simple repair by a qualified technician.

Hope this helps?

81vtplmc5ul._sl1500_-xwful1oshraynucwn4zj0zwu-1-0.jpg

Jun 14, 2017 | Maytag Centennial 3.2 cu. ft. SuperSize...

1 Answer

Maytag Front load Washer. "SUDS"


Clean the drain pump basket. http://www.youtube.com/results?search_query=kenmore+elite+front+load+washer+drain+pump+cleaning&oq=Kenmore+Elite+Front+Load+Washer+drain+pump+clean&gs_l=youtube.1.0.33i21l2.425000.427123.0.432800.6.6.0.0.0.0.410.1517.2-5j0j1.6.0...0.0...1ac.1.lQhVllMwg9M

Jan 27, 2013 | Maytag MAH2400 High Efficiency Front Load...

1 Answer

Cloths are wet after spin cycle


ceck for kinks in the drain hose .if you have a wet vacuum try sucking on the drain hose, or fallow the drain hose into the back of the unit to see if there is a blockage or a belt off .. jay florida

Nov 23, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Cloths still very wet after final spin cycle


Use spin ccyle again for proper operation and to help remove water.

Apr 29, 2010 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Maytag neptune washer clothes staying wet after cycle


Is your door lock light on when machine is in use? I am having the same issue as you and I believe it is because my door is not locking during use.

Apr 17, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag model MAV208DAWW washer, clothes still damp to wet after spin cycle. DIYer, want to try to fix it myself.


excellent love a guy willing to try
ok wet cloths
with this model i would the first thing to check is the height of your drain,,,, if the drain ios highter than 6 feet the unit just cant do it
next check your belt, this sometimes becomes stretched, more than 1/2 deflection id change it

Oct 25, 2009 | Maytag Legacy MAV208DAWW Top Load Washer

1 Answer

Maytag washer


check to make sure the door is locking when it should. If the door isn't locking or sensing that its locked the washer will not go into high speed spin.

Mar 31, 2009 | Maytag Neptune MLG2000A Front Load Stacked...

1 Answer

Cloths Soaked after Spin Cycle


If the motor has a transmission, it could be stuck in 1st gear. I think the agitator running is normal.

Jan 17, 2009 | LG WM1814CW Front Load Washer

Not finding what you are looking for?
Maytag Neptune MLG2000A Front Load Stacked Washer/Dryer Logo

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...