FO4 Error Code with Hotpoint Openspace Cooker - Explain please

Error code 367 on a Zanussi cooker typically indicates an issue with the temperature sensor or thermostat. When this error occurs, it means that the temperature sensor is detecting an abnormal or out-of-range temperature. Here are some possible causes and steps you can take to troubleshoot the issue:

1. Power cycle the cooker: Turn off the cooker and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. Sometimes, a simple power cycle can resolve temporary glitches or errors.
2. Check the temperature sensor: The temperature sensor is responsible for detecting the oven's temperature and sending signals to the control board. It's possible that the sensor has become faulty or disconnected. Inspect the sensor for any visible damage or loose connections. If necessary, consult the cooker's user manual for instructions on how to access and check the sensor.
3. Inspect the thermostat: The thermostat regulates the oven's temperature. If the thermostat is malfunctioning, it could be causing the error code 367. Look for any signs of damage or wear on the thermostat. If you suspect a faulty thermostat, it may require professional repair or replacement.
4. Contact customer support: If the above steps do not resolve the issue, it's recommended to contact Zanussi's customer support or a qualified technician for further assistance. They will have the expertise to diagnose the specific problem with your cooker and provide guidance on the necessary repairs or part replacements.

It's important to consult the cooker's user manual or documentation for model-specific troubleshooting steps or error code interpretations. The manual may provide additional information or suggestions for resolving error code 367 on your particular Zanussi cooker.

They all have a model number, but you don't tell us, 'slimline cooker' is just a description.

error 26, or error 36? Error 36 exists, but for all errors they say to contact for service.

ER36

NTC value is not within its specification. (Value < 200mV or > 4.9V; Control unit cuts off. Short circuit or cut off at NTC.

CONTACT YOUR DEFY SERVICE CENTRE AND SPECIFY THE ERROR CODE

https://defy.devworktdmc.com/pdf/6144418a2ede2-1631863178.pdf

https://www.google.com/search?q=Defy+cooker+error+26

..

sounds like a welded relay...

Open the oven from top and chalk pawer supplt , there is fuse 3.5Am maybe it blone .

If you have a problem with your hotpoint cooker or oven then this diagnostic video will help you find the fault and i hope it helps you. i have put a link also so you can get the parts for your cooker

cooker parts
Need help fixing your appliances

these repair guides will also help you find and understand the exact problem with your cooker

How to Repair

and if we really helped you you could always buy us a beer
Buy Paul Beer

It sounds like it is drawing too many amps. The only way to fix that is to upgrade your wiring. If you do have the proper outlet then you need to check the wiring for a short, improper grounding or the breaker itself.

no, but can i ask your general opinion of this as thinking of buying one

The part number you require is----------6204036.
Should you require the knob as well, the number is---------6201888.
These can be ordered directly from Hotpoint.
Please rate my solution.
Thanks.

You can down load the user instructions from Hotpoint web site.

In your browser bar type in---- hotpoint user manuals

Then in the drop down list click on------ hotpoint manuals and guides
In the search box type in your model number and down load instructions.
Plz rate my solution.
Thanks.

it sounds like you have had bad insalltion caused by your element becoming open circit try replacing and this should solve your problem regards jason