Question about Computers & Internet

1 Answer

I have an EBR2310 D-Link router (not wireless). 2 mac computers are connected. The older computer is connected to the internet but I am having trouble connecting my newer mac to the internet. Earthlink won't help.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 23 Answers

I would check to see if your getting an IP address from the router. If you are, try to see if you are able to access the router.

http://www.ehow.com/how_4550065_check-ip-address-mac-os.html?ref=fuel&utm_source=yahoo&utm_medium=ssp&utm_campaign=yssp_art

Type the router's IP address into your safari window: Usually 192.168.1.1

If you have a good IP but still can't access the website, there could be an issue with your new mac computer. Here is the toll free support line for mac: U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Internet connection fails through DLink router


Some ISPs (Internet Service Providers) require that you "register" the 'MAC' (not an Apple --> Media Acquisition Control) address of the network-adapter of your computer (or router) with the ISP,
before the ISP will allow your computer (or router) to be provisioned.

Your router has a different MAC-address than your computer.
So, your computer works with its "registered" MAC-address,
but your router cannot connect with its "unregistered" MAC-address.

Access the web-server inside the router, and click the 'Clone MAC-address' button, and restart the router.

Then, the router will send the MAC-address of your computer, rather than its own MAC-address, to your ISP.

Dec 31, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

I am trying to add a password to my wireless internet connection (D Link Router), so it cannot be accessed by everyone in my neighborhood. I am a mac user.


You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here for step by step instructions

Dec 26, 2009 | D-Link 4-Port Ethernet Broadband Router...

1 Answer

My computers wait for far too long to connect to all websites, and sometimes not at all !


Clear your cache. The cache is fullof temporary Internet files that you downloaded while browsing the Internet,like movies, music and large photos. Once your system is clear of these itemsthe Internet may move more quickly.
Use Mozilla Firefox or GoogleChrome. These browsers are known throughout the Internet community for allowingyou to have a quicker (and safer) Internet browsing experience.

Connect to a wireless connectionthat is closest to your computer. Sometimes when you connect to a wirelessconnection that only has one or two bars of strength, the Internet is slower.Connect directly to your cable or DSL modem with your Ethernet cord

Dec 16, 2009 | D-Link 4-Port Ethernet Broadband Router...

1 Answer

DL 524 router with a mac


When you connect the MAC to the router with the CAT 5 cable it works , that means the wired connection of the router is working but the wireless is not working.
You will need to check the wireless settings of the router.
Is there any computer connected to the router with the cable ?
If not then you will need to connect the computer to the router and open the set up page of the router.

Click Here for step by step instructions

Dec 02, 2009 | D-Link AirPlus DI-524 Wireless Router

2 Answers

I have speed stream 4100 router. How do I check


Hi,

Login to your router, set the wireless mode to WPA for encoding, then make a strong password, this will be un-breakable as it uses AES encoding.


To see active PCs click current clients.

Oct 12, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

Replaced a Linksys befsr11 with D-Link Ebr2310 and


Have you changed the settings on the other computers....
you didnt say if it was wireless or wired?
Check the configuration of the router as well

Heres a link to the support site for that router http://www.dlink.com/products/?tab=3&pid=EBR-2310&rev=EBR-2310

goto this link
http://192.168.0.1
and put in the user "admin" and no password to access the setting of the router



Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Aug 27, 2009 | D-Link 4-Port Ethernet Broadband Router...

1 Answer

I have 2 laptop computers with built in wireless and I am trying to connect to internet via a D-Link 615. I have tried multiple things but it keeps telling me that my cable is disconnected and I have no...


HI. you have to check first what kid of modem u have.. im sure if the laptop is connected directly to the modem, u have a wired connection and u can connect to the internet.. if ur modem is a cable modem, u need to mac clone the mac address of the computer that can connect to the internet. u need to connect the computer that can connect to the internet to the router and do a mac clone and the internet connection settings is dhcp..if u are using a username and password to connect to the internet, u need to use the pppoe settings on the router, and if ur isp give u a static ip address, u need to set the router on static ip. how u can check the ip address, click on start, run and type cmd and it will show a dos prompt, type ipconfig/all and it will list the ip address, subnetmask, default gateway and dns server.. u need to setup the router first in order to talk to ur modem..

Jul 17, 2009 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

Broadband


purchase and install a broadband router. connect both computers to the router. make sure to follow the particular routers setup instructions fully

Mar 22, 2009 | D-Link 4-Port Ethernet Broadband Router...

1 Answer

I have installed 2 delink routers for my Mac, I still cannot get on line. the mac is new, what is the problem?


Try to configure the DIR-625 wireless router. Connect your computer to one of the LAN port to one of the router. Then access the IP address of the router (192.168.0.1) configure as dynamic IP then clone the MAC address. Make sure that you modem is connected to Internet port section of the router. Check the Internet connection after the configuration leave the other behind check the connection of the main router before installing the other one.

Mar 10, 2009 | D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...