Question about Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: washer make a clicking noise
Zoobs, you could have something stuck under the agitator. The agitator will pull straight off. Grip it on each side and pull up hard, but don't hit yourself in the face. If that don't work, try slipping a belt under it and pull. Check for something caught under it. Another possibility could be the nylon suspension rod socket supports in the back. They will make a noise during agitation if they are dry. Put a little 3 in 1 oil to quite them down. Take the front panel off and check the pulley and belt, see if anything is out of whack. I also often find the motor support hitting the bottom panel during agitation making noise. Take the front panel off and observe during agitation. See if the support is striking the bottom. If so, just bend the bottom panel down. Catriver..post back.
Posted on Dec 01, 2006
Your first question I need a little more information. What kind of noise is it? Is it a squeek, or a roar, or like rocks in the tub? The second answer is more than likely a timer problem. This part (Maytag # 22004189) costs around $60 to $75 depending on where you live. Run that part number through eBay for special deals sometimes for those parts. Be sure you find out what that noise is first. If you have a transmission or bearing going bad, that could be a costly repair. Let me know what that noise sounds like, and we'll go from there. Jim
Posted on Nov 19, 2007
SOURCE: washing displaying OE error code
Just resolved same problem...it is the pressure switch aka water level sensor. OE is overflow error. Pressure switch is located under top cover on front right hand side. It is round and has a rubber tube leading down to the drum and a electrical connection to the board. Paid maytag man to diagnose/install cost me about $150
Posted on Apr 26, 2009
Tips for a great answer:
Jul 20, 2015 | Cars & Trucks
Dec 31, 2017 | Whirlpool WTW6400SW Cabrio Washer
Mar 26, 2014 | 2006 Ford Mustang
Mar 04, 2018 | Buick Century Cars & Trucks
When my washer did that, I found that the shocks that hold the tub were bad...
Check out this tip I wrote about the noise and vibration that front load washers can make..
Washer Problems Washer noise when spinning
Jan 03, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Nov 16, 2009 | Kenmore Washing Machines
Jun 15, 2009 | Refrigerators
Jun 22, 2008 | Maytag Neptune MAH5500B Front Load Washer
Apr 28, 2007 | Jenn-Air JFC2089HE French Door...
Jul 20, 2014 | Craftsman 2700 PSI Briggs Stratton...
Apr 30, 2014 | Craftsman 2700 PSI Briggs Stratton...
178 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: