Question about Epson Stylus Photo R220 InkJet Printer

1 Answer

R220 colour errors

Hi, whenever i print i get yellow & magenta horizontal lines across the width of whatever has been printed. tried numerous nozzle & head cleaning but can't seem to clear it. any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 619 Answers
Re: R220 colour errors

Chech the ink pan below maximum waste overflow, take the injection pump it or enject until ink finish.check ink cartidge or not fully engage the lock.

Posted on Dec 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Horizontal lines. Xerox 6505DN

clean the print heads and align them

Sep 10, 2012 | Xerox 6505N AllInOne Printer

1 Answer

All colours are printing ok but there arepink horizontal lines across the picture

1. you are running out of ink.. either the magenta or yellow.
2. ink head problem... needs cleaning/maintenance
3. virus infection that interferes with printing photos

Feb 01, 2011 | Printers & Copiers

2 Answers

Hi, When printing photos, my photos have horizontal light coloured lines across them. When I print the nozzle check pattern all colours match the guide with the exception of the light magenta....

Epsons are notorious for this sort of problem, especially in used infrequently as ink residue dries on the print head; try using a cleaning cartridge, or swab around relevant print head with cotton bud and ethanol/isopropyl alcohol. Here are examples of cleaning carts, there are others

Jan 03, 2011 | Epson Stylus Photo R200 InkJet Printer

1 Answer

My epson r220 printer is printing yellow horizontal lines across the paper why!!!

it maybe because your printers nozzle might be dirty. try to perform some cleaning cycles about 3 would be more effective......

Sep 10, 2009 | Epson Stylus Photo R220 InkJet Printer

2 Answers

I put a new ink cartrige and printer prints low coulour tone.

A technique to improve print quality is to try and clean the cartridge nozzles. You may clean the cartridge by following the steps given below: 
1. Go to the "Lexmark solution center." This can be done by clicking on "Start," go to "Programs" and Lexmark printer group. Click on the "Lexmark Solution center." Next click on the "Maintenance" Tab.  2. Select "Clean and Fix Horizontal streaks."  Click on "Print". This will produce a printed page. 
The colors that you should see here are black, yellow, magenta (a reddish purple) and cyan (a dark sky blue). You should notice the diagonal lines above and below the solid horizontal lines. These diagonal lines should be solid from left to right with no gaps. 
If there are gaps in the lines or the print diminishes across the page, you should run the "Clean Print Nozzle" page a couple more times to try and clear it up. If you still have gaps at the top and bottom, you should "wick" the cartridges by following the steps given below: 
1. Please open the "Solution center" again and go to the "Maintenance" Tab.  2. Select "Install color/black cartridge" and remove the cartridge or cartridges from the printer.  3. Get a damp paper towel.  4. Set the ink cartridge right side up on the damp paper towel so that the ink nozzles are against the towel and hold the cartridge in this position for about 15 seconds.  5. Now wipe the print head (on the bottom where the ink comes out) across in one direction only (left to right) until it looks clean.  6. Next dab the cartridge on the towel to make sure that the ink is flowing.  7. Snap the cartridges back into the printer.  8. On your computer, select "Old Cartridge install."  9. Repeat the "Clean Nozzle Page" one more time. If this fails to address the problem the entire procedure may need repeating.

May 26, 2009 | Lexmark Color JetPrinter 5700 InkJet

1 Answer

I have a used C60. I have replaced both ink cartridges with Epson cartridges. When printing in color, the colors are not accurate. For example, red comes out yellow. Also, there are lines running through...

Hi there. The reason for your problem is that the colour cartridge contains cyan, magenta and yellow ink, plus a black cartridge of course. All the other myriad colours are produced by mixing these four basic colours. So, if you print red, it requires ink from both the magenta and yellow cartridges. Thus if your red produces a yellow print, it means your magenta is not printing. This can be due to a number of reasons, mainly an empty or faulty magenta cartridge or blocked magenta print nozzles.

If you wish me to help you with sorting out the lack of magenta, please post a new comment to this effect.

Mar 04, 2009 | Epson Stylus C60 InkJet Printer

1 Answer

C88 / T060 cartridge refilling problem

sounds lke your yellow nozzle not working properly...had same issue on lexmark printer, ended up geting this epson...learnt from my mistakes...perhaps it ran dry? or you left the yellow cartridge out longer than the rest....only you might know what happened

Mar 22, 2008 | Epson Stylus C88 InkJet Photo Printer

Not finding what you are looking for?
Epson Stylus Photo R220 InkJet Printer Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

18259 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides