Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I need replacement brush - Vacuums

2 Answers

Think Crucial

Vacuums Master 894 Answers
Posted on Jul 13, 2015

Think Crucial

Vacuums Master

Joined: Oct 02, 2011

Answers

894

Questions

Helped

711267

Points

8395

Hey, this is Jeremy with Crucial Vacuum,

Sorry to hear you are having some difficulties with you brush bar. Since I was unsure of what make or model your original brush was I have attached a link to the Crucial Vacuum website. We make a wide variety of brushes and other vacuum products for considerably less than you would find anywhere else.

You can purchase replacement vacuum brushes direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
http://www.crucialvacuum.com/

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Jeremy Lerner
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

The easy way to find answers for every product...

fixya.com

Product troubleshooting support DIY...

Vacuum Cleaner Replacement Parts Repair Vacuum Bags...

crucialvacuum.com

Crucial Vacuum has huge selection...

Electrolux Filters Bags Accessories Crucial Vacuum

crucialvacuum.com

Electrolux Vacuum Cleaners and Air...

Huseyin Huseyin

Master 3,469 Answers
Posted on Jul 12, 2015

Huseyin Huseyin

Master

Joined: May 25, 2015

Answers

3469

Questions

Helped

767025

Points

11197

DO A WEB SEARCH FOR THE MAKE AND MODEL OF YOUR VACUUM CLEANER AND ADD THE WORD SPARES TOO, THE SEARCH ENGINES WILL THROW UP A NUMBER OF RESULTS FOR YOU TO CHOOSE FROM.
yOU CAN ALSO ADD THE AREA YOU LIVE IN TO GET SUPPLIERS NEAR YOUR HOME. All you then need to do is place an order, parts are usually delivered within a number of days

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Where are the brushes as need replaced?

If your brushes need replacing, they are within the motor, inside the cleaner. Unless the cleaner is old, say more than 5 years, or has been used very frequently, I would be surprised if the brushes need replacing. What symptoms do you have?

Read full answer

Jan 04, 2016 • Vacuums

0helpful

1answer

Hoover 8+spin1600 forever banging when spinning16

Hi! If your unit is noisy while the brushes are spinning this can mean that your brushes are worn or damaged. Try removing the brushes by pushing the two brush release buttons at the same time. Turn the cleaner on and see if the noise persists. If the noise stops with the brushes removed, you will need to replace your brushes. I have included a link below where you may go to purchase a replacement brush roll if needed. Hope this helps!

Search Results

Read full answer

Oct 02, 2014 • Hoover Floormate H3000 Upright Wet/Dry...

0helpful

1answer

Brushes not turning, 2 inch piec on one brush in place, the housing is spinning but not turning brushes

Hello there! It sounds like you may need to replace your brush block assembly. Try turning that drive shaft connected to the middle brush. All the brushes should be able to do a full turn simultaneously. If the brushes get stuck and cant make a full turn or if all of the brushes aren't spinning together then your brush block will need to be replaced. To purchase a replacement brush block simply follow the link below. Hope this was helpful!

Search Results

Read full answer

Sep 22, 2014 • Hoover SteamVac F5914-900 SpinScrub...

0helpful

2answers

Center brush repeatedly falls out on Hoover steam vac cleaner

You need to replace the brush block assembly

Read full answer

Aug 02, 2014 • Hoover SteamVac F5914-900 SpinScrub...

0helpful

1answer

My brush bar keeps falling down. We replaced motor but now the brushes don't spin.

Hi! If you've replaced the turbine & gear assembly and the brushes are still not spinning, a replacement brush-block assembly may be needed. The brushes counter rotate and need each other to spin. If a single brush is falling out, the brush assembly is broken. If the whole brush assembly keeps falling out, the drive pin shaft may be damaged. To order a replacement brush-block follow the link below.

Search Results

Hope this helps!

Read full answer

Jun 03, 2014 • Hoover F7425-900 SteamVac V2 Widepath...

0helpful

1answer

Air driven turbo brush

Is this the Lightning model? How old is it? You may have to just replace the belt.

Also, the front brush motor will not engage until the power is turned on and the handle is in the down position. In the upright position the brush motor wont engage. Typical faults will be the belt is broken and needs replacing or the fornt brush motor needs replacing.

Read full answer

Nov 27, 2011 • Fantom Vacums Vacuums

0helpful

1answer

Ball makes a clicking sound and brush isn't turning

Check the brush. That could be the problem. Check the belt also. Your brush roller may need to be lubed or even replaced.Turn it over and wipe all the black residue off the bottom of it.------ Either the brush is getting clogged and blocked by dirt, hairs etc etc and that needs to be cleaned or the brush bar motor is got faulty and needs to be replaced.------- You can yourself replace this motor,m if its not running.------- To get instructions to disassemble the vacuum and replace the motor, click this link below :--- http://howtobyme.blogspot.com/2011/08/brush-not-turning-on-dyson-ball-dc24.html----------- This will-help.Thanks.Helpmech.

Read full answer

Aug 25, 2011 • Dyson Ball DC24 Bagless Upright Vacuum

1helpful

1answer

I replaced the clutch in the dyson dc14. it isnt making that terrible noise anymore....thank god!! but the roller brush is not moving when the vacuum is in use. whats wrong?

The "horrible noise" you were hearing before wasn't the clutch! It was the roller brush. If the brush is not turning, all you are doing is burning out your new clutch. Reasons for the brush not turning: there is hair, carpet fiber or other matter wrapped around the brush that needs to be removed. Remove the roller brush, inspect it, and remove anything that could interfer with it's functioning. Reinstall and give it a test.

But in my experience, the brush needs to be replaced. Remove the brush and look for cracks in the plastic, If you see any, it needs replacing. eBay, via a distributor from England, is your best bet as far replacing the brush. Be careful of non-original brushes as they will break easily and are not of the same quality as the originals. Try searching for "DC14 brushroll" and then go down to the International Sellers at the bottom of the page.

Do not continue using the vac until you have solved the problem. You will only have to replace the clutch again.

Read full answer

Sep 22, 2009 • Dyson DC14 All floors Bagless Upright...

0helpful

1answer

Dyson DC07 brush roller is worn and won't make contact with the carpet anymore. I need to replace the brush roller but don't know how...HELP?

Buy the brush over the web etc..

To take the brush out
1 - Take the outer covering - uese a penny to turn the yellow srews

2 - Slide the black brush out from the assembly - Try the non belt side first.

3- Slide the belt out of the brush.

4 - Take brush out - Replace it with new one.

Read full answer

May 09, 2009 • Dyson DC07 Allergy Blue/Turquoise Bagless...

3helpful

2answers

Bissell upright vac, brush on bottom does not rotate

The front brush motor will not engage until the power is turned on and the handle is in the down position. In the upright position the brush motor wont engage. Typical faults will be the belt is broken and needs replacing or the fornt brush motor needs replacing.

Read full answer

May 21, 2008 • Bissell Lift-Off(R) Revolution(R) Turbo...

Not finding what you are looking for?

View Most Popular

Vacuums

Where are the brushes as need replaced?

Vacuums

57 views

Ask a Question

Usually answered in minutes!

Related Topics:

Trustworthy Expert Solutions

I need replacement brush - Vacuums

2 Answers

Think Crucial

Huseyin Huseyin

Add Your Answer

Attachments: Added items

Related Questions:

Where are the brushes as need replaced?

Hoover 8+spin1600 forever banging when spinning16

Brushes not turning, 2 inch piec on one brush in place, the housing is spinning but not turning brushes

Center brush repeatedly falls out on Hoover steam vac cleaner

My brush bar keeps falling down. We replaced motor but now the brushes don't spin.

Air driven turbo brush

Ball makes a clicking sound and brush isn't turning

I replaced the clutch in the dyson dc14. it isnt making that terrible noise anymore....thank god!! but the roller brush is not moving when the vacuum is in use. whats wrong?

Dyson DC07 brush roller is worn and won't make contact with the carpet anymore. I need to replace the brush roller but don't know how...HELP?

Bissell upright vac, brush on bottom does not rotate

Not finding what you are looking for?

Vacuums

Where are the brushes as need replaced?

Ask a Question

Check out the Latest Vacuums Report

Top Vacuums Experts

AskDyson

Les Dickinson

Anonymous

Are you a Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

180704-1 (1).pdf. user-manual-FBBLC...

VP215 Specs in Amazon.pdf....

BISSELL_User_Guide_Garage_Pro_Wet_Dry...

Related Topics:

Trustworthy Expert Solutions

I need replacement brush - Vacuums

2 Answers

Think Crucial

Huseyin Huseyin

Add Your Answer

Attachments: Added items

Related Questions:

Where are the brushes as need replaced?

Hoover 8+spin1600 forever banging when spinning16

Brushes not turning, 2 inch piec on one brush in place, the housing is spinning but not turning brushes

Center brush repeatedly falls out on Hoover steam vac cleaner

My brush bar keeps falling down. We replaced motor but now the brushes don't spin.

Air driven turbo brush

Ball makes a clicking sound and brush isn't turning

I replaced the clutch in the dyson dc14. it isnt making that terrible noise anymore....thank god!! but the roller brush is not moving when the vacuum is in use. whats wrong?

Dyson DC07 brush roller is worn and won't make contact with the carpet anymore. I need to replace the brush roller but don't know how...HELP?

Bissell upright vac, brush on bottom does not rotate

Not finding what you are looking for?

Vacuums

Where are the brushes as need replaced?

Ask a Question

Popular Questions

My shark steam mop heats up but won't steam. help

My dyson keeps cutting out. It's like a pulse noise and works intermittently.

I have a dyson hand held that shuts off after just

Brush won't spin on my shark navigator.

My shark rotator brush won't spin. How do I fix it?

Check out the Latest Vacuums Report

Top Vacuums Experts

AskDyson

Les Dickinson

Anonymous

Are you a Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

180704-1 (1).pdf. user-manual-FBBLC...

VP215 Specs in Amazon.pdf....

BISSELL_User_Guide_Garage_Pro_Wet_Dry...