What means this code E000225-0001 ?

that is an error code for a Canon printer not for the computer
it means you Canon Printer needs a drum unit, or a senor

Canon IR2270/IR2870/IR3570/IR4570/IR5070/IR5570/IR6070/IR6570
Enter the service mode (Press "Additional Function" key, Press "2" and "8" simultaneously, press "Additional Function" key again).
Go to COPIER----FUNCTIONS-----CLEAR----ERR. Here you can reset all error codes on by one.

for more details : www.mytechtime.com/2011/10/canon-error-e001e002-e003-e007.html

Hi
I found the following description for your error
Description:- The rotation of the main motor is faulty.
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
Remedy:- Replace the main motor. Replace the DC controller PCB.
This was here:
Error Codes Canon iR4570 Code E010 0001
On this webpage where you can change the code you are receiving to a different one if required (or view them all) by using the drop down menus along the top of the page. You can also change the make & model using the drop down menus if you wish. You can also get a Service Manual from this page using the link.
Hope this is helpful, if so would you please register that with Fixya
Cheers

the scanner motor does not work

mohon tdibantu untuk mengatasi E0024-001 untu ir4570 terima kasih

It is my pleasure to guide you.

Your Canon iR 4570 All in One Printer Manual iR4570
User's Guide can be downloaded at http://download.canon.it/manuali_operatore/files/iR4570_USR_ENG.pdf

Look at Chapter 3 Troubleshooting
List of Error Messages ..3-6
List of Error Codes without Messages. . 3-6
http://download.canon.it/manuali_operatore/files/iR4570_USR_ENG.pdf
You will find the list of error codes.

Also, http://servisfc.blogspot.com/2010/12/detecting-error-e007-for.html
gives the following;

QUOTE
Detecting Error E007 at canon copier iR2270, iR2870, iR3570, iR4570, iR3530.
As part of its protective mechanism, the machine checks for the following error conditions.
Error Code: E007
Detail: 0000
Sympton: The fixing film rotates in an abnormal way.
Description: The reading of the main thermistor is in excess of 100 deg C with the fixing motor in a locked state and in addition, the machine fails to detect the marker signal for 6 second.
UNQUOTE

Good luck and please post back that you are successful, giving thumbs up, or that I can be more helpful.

i think pressure roller problem.check it

on ir5570 error ,,E000110-001,,is polygon motor

FIXING EXAS FAN ,,, IN RIGHT SIDE DOOR