Hi I have a Thomas Pacconi classic model no tpc-mse-807 when I lift the tonearm the turn table spins but when placed on record it stops can you help with this problem please

The CD drive can't read the disc so rejects it.

Owning a turntable is often almost a hobby as they need maintenance from time-to-time - adjustments, cleaning and lubricating, replacement belts or wheels...

Some need more attention than others but sorry I can't help with the details of your turntable.

https://www.turntableneedles.com/find10.asp?manfg=THOMAS%20PACCONI&modelname=TPC-MSE-805&Select=Model
Try these guys

Look on the data plate to see if there is a voltage and current draw value on it. The switch should be rated at 120 Vac @ 10 A.

Most likely it's a capacitor fault.

Google "Capacitor bulge" and then search Youtube for your make and model to see if anyone has done an instructional video. You'll need to be comfortable dismantling the unit and be able to use a soldering iron. If this isn't you then take it to a repair shop.

Since you have no sound even on radio, it's not going to be a bad tt motor. There is no fuse except for a thermal fuse inside power transformer. I would start with a continuity check accross both of the blades on the plug. If it's open, you prob have a bad power transformer.

could you include a picture of the under side of the turn table where the belt is fitted?

ZXAEEE

I have the same unit. Where do you find the screws that hold the cd clamp cover?

These people may help you.
www.turntable-power-supply.com