How do I change the Paper In feed from Landscape to Portrait in a sharp ar 5516

See troubleshooting section of user manual at page 65
Troubleshooting - Sharp AR-5516 Operation Manual [Page 66] ' ManualsLib

any sensor displace please check cassete paper sensor.

Hi.

You cannot upgrade the memory on the copier as the memory is in-built into the system thus giving you no chance of upgrading.



Regards.

sharp ar 5516 showing ( - - - ) what's the solution

Check your paper tray settings under system settings/paper tray settings. You can also try turning off auto image.

F2 fault code

hi,I have error code L h on my coppier sharp 5516. your help please.

Hello sir; When you feed originals in portrait, the paper tray have to set by portrait direction too.

select scan mode, then select legal on paper select. If you select paper before loading document into the ADF it should go with the size you enter.

Sounds like your tray settings are incorrect. Make sure that if the tray is set to 8 1/2 X 11 in the menu settings(not 8 1/2 X 11R) that the paper is set in the tray to feed the long edge first. The machine is capable of automatically rotating the image to fit the paper as long as the paper is set correctly.
If you prefer to feed short edge first then set it for 8 1/2 X 11R.