Question about Computers & Internet

2 Answers

Ok, i have two things to ask 1: Where is the video card on a emachines W3503? 2: Could a video card swap be done between a W3503 and a W3052? Thank you for viewing :)

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,567 Answers

1. The emachines W3503 has an integrated ATI Radeon™ X300 based graphics card. It has also a PCI Express (PCIe x16) slot available.

2. The emachines W3052 has a NVIDIA® GeForce®4™ MX graphics card. I'm not sure whether it is integrated or not, but I'm sure that if it is not, it will be an AGP graphics card. Since The emachines W3503 has a PCI Express (PCIe x16) slot available for installing a graphics card, the swapping of graphics cards between the 2 machines is not possible since they support different types of graphics cards.

Posted on Jul 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

The video card is directly where the monitor plugs in. The W3503 has the video card integrated onto the motherboard, so there will be swapping with that machine.

The W3502 is the same machine with just a slightly slower processor.

Posted on Jul 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect E-Machines W3052 to an HDTV


check the video card, there may be ports on it to connect to the tv. it depends on the card and tv adapters. you need the right cable as well

Oct 09, 2012 | E-Machines W3052 PC Desktop

1 Answer

Choppy graphics on every game


you should have atleast a 400watt pwr supply for gaming, if this fails try upgrading your video card to 1 gig ddr video card.

Dec 27, 2009 | E-Machines eMachines Desktop PC

1 Answer

My w3052 emachiens desktop computer card readers wont work


Visit the support section of the eMachine website to get the software that controls that function.

Oct 25, 2009 | E-Machines W3052 PC Desktop

1 Answer

Emachines W3052 Gets stuck on logo screen when starting up.


My computer does a similar thing, the issue with mine is the mother board which requires everything to be at a certain temperature. Let it run on the start screen for a couple minutes and hit the reset button. If it doesn't boot up you're going to have to get more involved with your PC. Turn off the power, unplug the cord from your power supply, open the case, look for the battery and the JP8 (CLRTC) jumper. Move the jumper from pins 1-2 over to 2-3, wait 30 seconds, and move the jumper back. Close the case, plug in the power cord, turn on your machine, and boot it up. If it still fails to boot check that all cables are securely attached (inside and out), check that the RAM is securely seated, and check the CMOS battery to be sure it is not dead. Beyond this you're looking at a component failure and should contact a repair tech.

P.S. if you feel up to it and can't wait for service, pull the hard drive out of the first computer and use it in a different computer. Be sure to unplug the hard drive from the second computer.

May 16, 2009 | E-Machines W3052 PC Desktop

2 Answers

Emachine monitor problem


Your monitor is probably OK, it is the computer that probably has the issue.
On a great number of e-machines that I have worked on this is caused by the following:
1) Failed power supply unit. Swap with another of equal or greater power. Caused by failed capacitors in the power supply.
2) Failed capacitors on the motherboard. Look at all of the cylinder looking things on the mother board. If ANY of them have a bulged/raised top or are leaking fluids then you have bad caps( capacitors) and the motherboard is bad. Caps can be replaced by an experienced person. Caps should be perfectly flat. I have had several e-machines in the shop with this same problem.
3) Failed video card.
4) Failed processor.

What is most likely happening is that the computer is not passing the POST (Power-On-Self-Test) and therefore does not get to putting the video output to the monitor. When the monitor gets nothing from the computer it will display the message you are seeing. In a majority of e-machines that I have seen it is caused by bad caps on mobo and PSU.

If the machine is out of warranty then open the case and look at your motherboard (mobo), you may need a flashlight. If you could respond back and let us know if you have done this and if you have no bad caps, then what are you getting from the computer:
Fan turns on, CD lights briefly, Hard drive is spinning, etc. Also listen for beeps.

Mar 08, 2009 | E-Machines eMachines Desktop PC

1 Answer

I have emachine w3052. The


The board should have markings indicating where to put the wire. It will probably be abbreviated such as "PW" or something similar.

eMachine Support

Jun 10, 2008 | Computers & Internet

1 Answer

Saw you were on the top of the list so i thought i would ask you:


if you want better video performance(like for games, etc) you'll want to consider a higher quality video option. nvidia is goodd.

May 09, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...