Question about Mag Innovision 19" LCD Flat-Panel Monitor LT916S

1 Answer


Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 138 Answers
Re: LT765 S

Hi this is the way how to examine what's wrong with your LCD monitors. After you turned it on, you have to check that if you can see the image on the screen or not by shining a flashlight into the screen, not directly but find the best angle to the screen and take a look very closely. If you can see the icons or any image, there will be a minor problem. This is because of the lamps inside screen. Some of them were broken and it is very easy to replace. If you cannot see anything on the screen, there'll be some problems with inverter board. If you have soldering tool and want to fix it by yourself, check the caps first. It may cause this problem. Some caps might show leaking or burn spot on the board because of too high temp. If you don't have soldering tool, you better go get a technician to do so. Hope this help!! If anything I can help you with, feel free to let me know.
Thank you,

Posted on Mar 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need a new power cord


If you need the whole adapter, you can get them here:

If you need just the power cord for the adapter they are available here

I hope this helps.

Mar 23, 2012 | Mag Innovision InnoVision LT765 17" Flat...

1 Answer

Dear sir, my ibm e54 monitor shoes the monitor menu buttom display again and again.inspite of pressing the exit buttom

Your monitor might be defected during the manufacturing.Try contacting your dealer or salesperson.Avail free services if the time period hasn't exceeded guarantee.

Feb 15, 2011 | IBM E54 15" CRT Monitor

1 Answer

Hi, it seems I have a problem with my monitor. Usually it doesn't turn on when I boot (had to keep pressing the power button or the power cable) until it opens up. When it turns off by itself at...

It may have dying power suply due to bad DC filter caps, you will need to inspect that first.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for:
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:

Capacitors kit: he can make you a set of caps for you.

Nov 02, 2010 | Hanns.G Corporation HW173D Monitor

2 Answers

No signal on monitor

Dear Brother,
  • Check your Monitor Cable
  • Check your Cables PINS Broken/Damaged
  • Check Properly Plugged in the Cable to both PC and Monitor
  • Check your Display Card
  • Check your Motherboard Connection With Display Card
  • Unplug the Cables end From PC and Monitor
  • Unplug From Power too and Then Correctly Plug in
  • Connect CPU to another PC(for making Sure problem is for Monitor)
Your Problem can be Solved...... Hope This HELPED YOU Thanks For Using FixYa

Apr 06, 2010 | Mag Innovision InnoVision LT765 17" Flat...

1 Answer

Where to plug the power cord in the back of MAG TL765s Monitor

There should be another hole next to the speaker connections that says DC in, it goes in that hole.

Oct 29, 2009 | Mag Innovision InnoVision LT765 17" Flat...

2 Answers


Normally the OSD lock will only be displayed for 5 seconds.
Regardless you should be able to get rid of it by pressing holding the up arrow key for 10 seconds.
If this fails to resolve the issue try this. Disconnect power cord. Now press and hold button 1. Plug the power cord back in. You may have to press the power button while still holding button 1. The OSD lock should clear after that.
Hope this helps.

Oct 02, 2009 | ViewSonic E70f 17" CRT Monitor

1 Answer

MAG monitor is all white

please change your ram immeditately or monitor itself because the life of monitor has been came to an end...

Dec 31, 2007 | Mag Innovision InnoVision LT765 17" Flat...

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computer Monitors Experts

William Miller
William Miller

Level 3 Expert

8803 Answers


Level 3 Expert

2598 Answers

Are you a Mag Innovision Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides