Question about Car Audio & Video

2 Answers

Need numbers on side of radio...but cant remove it

Posted by on

  • wes_dog_11 Jul 11, 2009

    im not at the car right now.....but its the factory deck for 2001.....not sure if the actual model matters...any way when i slide out cupholder under radio i can see 2 bolts but cant get at them

  • wes_dog_11 Jul 11, 2009

    i need a audi tech or...a person who really knows car audio.
    i have a 2001 a4 that i cant find the "hidden treasures" of getting the factory radio out.... changed alternator and need to get safe mode code, can you offer me some know how???

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hi Wes. Go to any auto zone store and they will loan you the tools and the know how to get to your numbers. They are terrific.

Posted on Jul 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 285 Answers

Need to know brand of radio please?

Posted on Jul 11, 2009

  • Dean
    Dean Jul 11, 2009

    and what car and model it is located in

  • Dean
    Dean Jul 11, 2009

    what car is it located in?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My radio is on complete safe mode


Call you Audi dealer with the VIN number and the serial number of the radio. You need to remove the radio to obtain the serial number.

Mar 12, 2016 | 2001 Audi A6

2 Answers

I cant find ford ikon serial no how to find it


ok this is just a guess but assuming this is a radio, remove the radio, look on the side starting with 'M' then followed by a 6 digit number. Take this information to a dealer and they can look up the info and give you the code.

Dec 31, 2014 | Cars & Trucks

2 Answers

Finding "M" code for radio on Ford Transit Connect


Hi harry. the code you mentioned is on the side of the radio on a data sticker. If you don't have the proper radio tool to remove the stereo you can use 4 small cross head screw drivers. You will see 4 small holes in the front of the stereo, 2 on each side near the edges. With a bit of patience you can get away with two screw drivers and release one side at a time. You need to push the screwdrivers about an inch into the holes and gently pull them towards the outside of the radio, This will release the clips and the radio should come out with a gentle tug. You may even get lucky and find a previous owner has written the four digit code on the radio at some point, If not send me the number and I will send you your unlock code, Jon

Dec 09, 2013 | Ford Cars & Trucks

1 Answer

Cant find vr4 on my cobra 29 made in vietnam


With the covers removed and the front of the radio facing you with the component side up, You will see a transformer with yellow,blue or red colored tape around the center. VR4 is located to the left of that. If you still can't find it, then remove D11 to open up the audio.

Jun 20, 2012 | Cobra 29 LTD CB Radio

1 Answer

I cant seem to remove the radio in a ford e350 i did buy the tool for this but with no luck is it bolted or do i have to remove the dash panal


Do you have two of the tools needed to remove the radio? The tool should be pushed into the holes until it stops then you want to slightly press outward to make the clips pop so the radio can be removed...I have used skinny screwdrivers to accomplish this in the past due to unavailability of tool..most of the time you need to have both sides pressed in at the same time to remove otherwise one side will pop then when you go to other side the previous side will re-lock back in

Jan 08, 2011 | 2002 Ford E350

1 Answer

Igot volksvagen getta 97 I need redijo code


CHECK YOUR OWNERS MANUAL FOR THE 4 DIDGET CODE. IF YOU CANT FIND IT YOU
WILL HAVE TO REMOVE THE RADIO FROM THE CAR. ON THE TOP OR RIGHT SIDE
OF THE RADIO WILL BE A NUMBER BEGINNING WITH VW.( EXAMPLE VWZ9Z4V)
TAKE THIS NUMBER TO YOUR LOCAL VW DEALER AND THEY CAN GET YOUR CODE
THAT'S THE ONLY WAY I BELIEVE YOU CAN GET IT IF YOU HAVE LOST IT.
HOPE THIS HELPS

PS. CHECK ALL THE BOOKLETS THAT CAME WITH THE CAR FOR YOUR CODE IT SHOULD BE THERE UNLESS YOU HAVE LOST IT.

Dec 20, 2010 | 1997 Volkswagen Jetta

2 Answers

Need Radio Code for 2003 Honda Civic


remove radio and get the serial # off the radio and go to your local honda dealer and they should be able to help you obtain the code

Feb 23, 2010 | 2003 Honda Civic

1 Answer

Gem module


behind the pass side air bag

Nov 19, 2008 | 2004 Ford Explorer Sport Trac

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4981 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81423 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...