Question about Canon PIXMA MP160 All-In-One InkJet Printer
E,4,2 = Scanner Error 
- Need to replace SCANNER UNIT
- Need to replace LOGIC BOARD ASSY
Posted on Nov 26, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 06, 2018 | Samsung Microwave Ovens
Feb 14, 2013 | Canon PIXMA MP150 All-In-One InkJet...
Feb 20, 2012 | Canon Office Equipment & Supplies
I believe is a scanner error. Try first to switch it off for 30 minutes
and try. Else re-attach the ribbon
cables of the scanner and try again.
error still persist then do a factory reset as per below
1) Switch off the printer
and hold the Stop/Reset button while switching on the printer.
3) With the Power LED lit, press the Stop/Reset button two times while pressing and holding the Power button.
4) Release the Power button and the Stop/Reset button that will put the printer in service mode. Just wait for the menu selection.
5) When the LED lights in green, press Stop/Reset button to specified number of time(s)
according to the Legend below.
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset procedures below.
5 times Orange Destination setting See Destination setting procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
Jul 13, 2011 | Canon PIXMA MP160 All-In-One Printer
Dec 20, 2010 | Canon PIXMA MP160 All-In-One InkJet...
Nov 06, 2010 | Computers & Internet
Jan 28, 2010 | Canon Office Equipment & Supplies
Aug 09, 2009 | Canon PIXMA MP150 All-In-One InkJet...
342 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: