I have switch and i want to connect switch to pc with rj45.and i want to share internet my pc to other pc. what to do?

(1) Console cable if you have desktop


http://www.instructables.com/id/Simple-RJ45-DB9-Cisco-console-cable/

For laptop console to serial cable

http://d32plhejlomyli.cloudfront.net/catalog/product/cache/6/image/500x500/9df78eab33525d08d6e5fb8d27136e95/1/4/14184.jpg



(b) Reset the switch it will work as a normal switch

skype id [email protected]

Not sure if you try to set up a WIFI Access Point or are you trying to share internet access through a PC? I will try to answer anyway... You need to connect the RJ45 (that square-ish) to your wireless router on the WAN port.

Most modern computers have a Network Interface Card (NIC) that used an industry standard RJ45 network jack (8 wire connection similar to a telephone RJ11 connector)
Most people now have broadband service (Cable Modem or DSL Modem) that has RJ45 connections. you also may have a Router between the computer and the Modem to share that internet connection with other computers. The router will also have RJ45 connections. Routers can also be wireless, and you can connect via 802.11 A/B/G/N wireless connection if your computer has an 802.11 standard wireless card.
So, once you detail the brand and model computer and the type fo network conenction/equipment you have, I can give more detailed answers.

I think the problem is that the modem is not giving enough ip addresses. Try configuring it. Some modems are also a router. This means that it has the capability to provide more ip address so that i can connect more pc.

lol this is funny. cmon now what do you expect to happen. what are you trying to do. cmon people be more specific

hey if you r having wireless system then you have to connect your spa2102 to your pc

connect your pc to internet via wireless connection
now you r having lancard on your pc which is free rightnow
connectyour spa2102 to this lan card
and if you r having win xp then go to my network plase
rightclick on it
go to property
you can se local area connection and wireless connection both in this window
right click on wireless connection and go to its property
find internet connection sharing or allow other users to connect internet via this connection/pc
enable it so that your spa 2102 can get internet connection via lancard

Hi Tony,

I assumed you'd like to share the printer on network. I recommend to buy a printer server device that will connect USB port of printer and that device has RJ45 port that can be connected to router or switch hub to share the purpose. Hope this gives you an idea.

Best regards,
Rosener

Usually DSL connections require ppoe while cable uses dchp You need to log into your router and change the settings

You would have to refer to the manual to set up the usb connection, so as the router knows that the main pc is connecting via the usb and not the rj45 port. The only other thing may be that your router will recognise when you are connecting with the usb port, as long as it's the pc with the modem drivers on.