I have an MTD 22'' self-propelled mower that is belt driven... the belt appears to be ok and in place but when I engage the propel blade, the front wheels don't pull as fast as they used to. I have to push much harder with the propel blade engage. What else should I be looking at?
I am trying to hook up a pass & seymour 3 way switch & pilot light to red,...
(More)
I am trying to hook up a pass & seymour 3 way switch & pilot light to red, white and black wires with ground. Need a picture wiring diagram showing how to hook this switch up. Can you help me please !
I have a Sears lawn tractor with a Briggs and Stratton Craftsman I/C 17 HP OHV engine. The engine...
(More)
I have a Sears lawn tractor with a Briggs and Stratton Craftsman I/C 17 HP OHV engine. The engine will run as long as I have the clutch in but when I let it out it procedes to cut off. I have replaced the gas, gas filter, and spark plug.
How do I know if installed the v-belt properly for an MTD 22" self-propelled mower...
(More)
How do I know if installed the v-belt properly for an MTD 22" self-propelled mower #12b-264c062. The belt has been installed around the engine and transmission pulleys and behind the belt keeper. does something need to occur near the engine belt keeper bracket? When the drive blade is engaged the front wheels do not turn? The belt is awfully loose even when the drive control blade is engaged? Do I need to adjust the driver control cable - if so, how do I do it?