FixYa.com
Technical Support, Instructions & Repair Service


Tags:

Projection Televisions
Generic problem for all Projection Televisions

I cannot get tv power on (by 9 users)

posted by cassim on Nov 15, 2007


power wont come on

This Problem has been added to the Share Your Expertise Page under "My Work Queue".

8 Other Users Have The Same Problem

Comment by angieculver, posted on Jul 28, 2008

I have a rca dw52w19 and have the same problem it will not power on the light on the powerbutton blinks 2 or 3 times then it gives up after continous pushing it may come on after 20 minitues of messing with it . I have a surge protector on it so any surge that occured lately should not have done this has anyone had this proble fixed ? how much did it cost ?

Comment by enlightened2, posted on Jul 06, 2008

I have a mitsubishi 1080 integrated series model number WS-55515 on a surge protector, today during a thunderstorm the power to my home blinked off for about 2-3 seconds and the tv has not worked since, no power to the green light on the front or anything, any ideas?

Comment by Guest, posted on Jun 22, 2008

have had NO problems for six years and after a thunderstorm all of a sudden there is NOTHING on the screen just black. The front red light is on but no vcr, dvd, station. zip. The other electronics on the surge protector work so I doubt it was lightning but it was strange that after the storm it stopped working. What do you think?

Comment by timwaters, posted on May 31, 2008

I have a Hitachi 57F500 57 in projeciton HDTV. It has worked perfectly for about 3 years now. We were watching the TV one morning, left to go to town for a little while and when we came back the TV would not turn on at all. The power button on the front of the TV will not come on. I took off the back of the TV and blew it out good with canned air. I can hear a faint buzzing near the power cord on the circuit board but I noticed the little red light on the board isnt on either. Please help.

Comment by msgirl410, posted on May 05, 2008

i have a rca model #d52w19 b bought december 2004. It will not power on. the green light will come on, but it goes right back off. I am at a loss where to start. help?

Best Solution
posted on Nov 15, 2007
Thanks for Trying (70)

premtech


Rank:Guru Guru
Rating: 89%, 789 votes
Gotta come-up with a little more than that if you're serious about getting some help.. Make, model, what happened before it failed - or how did it fail? Any other clues that could help me pinpoint the problem...

Was this solution helpful? Show your Appreciation by rating it:

This Problem Also Relates To: GE 46GW947 46 in. Rear Projection Television Panasonic PT-47WX53 47 in. Rear Projection HDTV Television Panasonic PT-52LCX66 Television Sony KP-51HW40 51 in. Rear Projection Television Panasonic PT-40LC12 40 in. Rear Projection HDTV Television Panasonic PT-53WX53 53 in. Rear Projection HDTV-Ready Television Sony KP-51WS500 51 in. Rear Projection Television

Can you Help with these Projection Televisions problems?

Sony Grand WEGA KF50WE610 50 in. Rear...
on the screen there are 3...
the whole screen is full of... Answer This...
Projection Televisions
toshiba ss-sr94 100hz...
toshiba ss-sr94 100hz... Answer This...
Projection Televisions
my hitachi model 65swx20b
my hitachi model 65swx20b has... Answer This...
Projection Televisions
printer will not line up
printer will not line up for... Answer This...
Projection Televisions
TV changes channels by itself
TV changes channels by itself... Answer This...

8 Other Users Have The Same Problem - Continued

Comment by Guest, posted on Mar 31, 2008

TV continues to turn off by its self; happens every 2 to 20 minutes

Comment by Guest, posted on Feb 17, 2008

i have a vs-50800 i get no power

Comment by MattinATL, posted on Nov 16, 2007

I have a RCA D52130. I recently moved it and when I put it on a stand, it would not power up. I took it off the stand and it powered up. I then pushed it back 3 feet and it won't come on again. I took the back off and found that the green ground wire from the plug going to the metal case was broke in half. I stripped back the wires and touched them together (Didn't have anything to splice them together) but the tv will still not come on.
I have seen people saying replace a fuse but I have not located one. I have also read about a protection mode and thaqt maybe I need to splice the ground and then wait four hours before trying to turn it on.

Please help....

Repair Service
Find Projection TV Repairman Near You:

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates
When the original poster rates a solution that was given to his own problem, that rating is locked!
X

Are you sure the solution content is Inappropriate?
   
Tech buddies can communicate directly to answer questions. Become a Tech Buddy and have direct access to your favorite expert for FREE!