Question about Printers & Copiers

1 Answer

Minolta magicolor 2300

My labels got stuck lost in the printer it shows an error report can i fix it or do i need to take it in to get repaired?? code 16 h is showing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 214 Answers
Re: minolta magicolor 2300

This code means, youre label get stuck in TBU and the TBU is not rotating anymore, take out tbu and try to find these labels and remove them with alcohol, do not scratch the belt.

Posted on Oct 14, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Fatal Error 14h 2300 DL

this link is going to take you the manuel that what you have to do when you got an error.

Nov 16, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Konica Minolta magicolor 2430DLshowing Fatal o8h

Error 08 relates to the main motor having problems turning. Quite often this is caused by a faulty consumable (opc,toner or transfer belt). Could also be that the lid is not closing properly and stopping the toner carousel turning freely.

Apr 18, 2009 | Konica Minolta magicolor 2430 DL Laser...

1 Answer

Service Call 15H

by or separation from the transfer belt cleaner

something wrong with the transfer belt

Apr 01, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Minolta Magic Color 2300dl printer won't print legal size documen

Is tray one the bypass tray or a tray. check which one is tray 1

Nov 24, 2008 | Minolta magicolor 2300W Laser Printer

1 Answer

Konica Minolta 2300 DL

Just sent you the manual.



Oct 02, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

My magicolor 2530 DL

Hi Condeleeza,

Normally smoke would be caused by label residue being left on the fuser rollers, I am assuming your use of the word label is correct and not a transparency (which is a common jamming source in laser printers) especially when someone mistakenly puts a inkjet transparency through a laser printer or mistakenly puts a clear plastic divider sheet through.
If you are sure all of the original label has come out and there is was no residue left directly on the fuser rollers, and the fact you now have smoke and an error code (which I do not have access to find service codes for Minolta), I suspect the fuser assembly is overheating now which is causing the error message (after probably 10 seconds after switch on from cold). This could mean the temperature sensor monitoring the fuser temp is either not touching the fuser due to label fragment lifting sensor off fuser roller surface or sensor is bent or damaged due to label revolving aorund or subsequent removal efforts.

Take a closer look and see if you can find a stray fragment stuck to a thermocouple sensor wiping against the fuser roller. Failing this then you probably need to send into service and ask for a quote to repair. Be aware that the fuser may have become scratched or otherwise damaged depending upon your label removal techniques....over zealous use of letter openers, nail files and small screwdrivers have destroyed many a good fuser assembly.

Good luck

Jan 14, 2008 | Konica Minolta Magicolor 2530 DL Laser...

2 Answers

Konica Minolta Magicolor 2300 DL - Fatal Error Code 0EH ????

I had the same problem one time, they told me to pull out all of the toner cartriges, power off, power on, power off, replace all cartridges and the problem went away.

Who knows why. If this doesn't work....

Call Konica Minolta tech support.

They were pretty helpful to me.


Nov 28, 2007 | Minolta magicolor 2300W Laser Printer

2 Answers

Minolta magicolor 2300

16H means, that the transfer belt does not rotate correctly, open all covers, remove any paper, whats stack inside, remove waste toner box, drum unit then open 2 nipple screws and pull out the transfer pelt, if the belt looks ok, reinstall everything and power on again. if works, then everything is ok, if not, then there is something wrong with TBU or TBU

Nov 14, 2007 | Minolta magicolor 2300W Laser Printer

1 Answer


Rack rotation failure, I'm not 100% that this is that error, but does the rack, where the toner are move ? if not, move it with manually a little bit then restart printer.

Nov 14, 2007 | Konica Minolta magicolor 2430 DL Laser...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts


Level 3 Expert

94039 Answers

old marine
old marine

Level 3 Expert

1301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides