I see that the NEC ND-2500A DVD burner has hit the shelves. Does 8X DVD+/-R and 4X DVD+/-RW. very impressive. Anyone know if this unit offers compatibility bitsetting with +R and +RW? Sure is a nice feature to assure compatibility with my DVD set-top players (Panasonics that want nothing to do with +R/+RW.) As I recall the old 1300A model either supported bitsetting or always set the "book" on +R/+RW disks to DVD-ROM which pretty much all set-top players can read then.
Was about to get the Benq DW800A which has bitsetting, but only supports the "+" formats. Their web site is mute on the subject of compatible disks, though. And they did not reply to my e-mail asking about that. So a little worrisome. The NU flavor of the drive supposedly only does 8x with "real" 8X disks which is no fun at all.
--
- GRL
"It's good to want things."
Steve Barr (philosopher, poet, humorist, chemist, Visual Basic programmer)
On Tue, 23 Dec 2003 20:19:28 -0500, "GRL" <GLitwin @CHARTERMI.COM> wrote:
The NEC 1300 does NOT support bitsetting out of the box, nor does it set the booktype as DVD-ROM. You will need to get the hacked flashware from Herrie to enable these functions.
my NEC DVD±RW ND-2500A will only read dvd's or burn dvds it wont reconize that there is a blank...
(More)
my NEC DVD±RW ND-2500A will only read dvd's or burn dvds it wont reconize that there is a blank cd or audio cd in the writer or any cd if that matters. so in short i cannot play or burn cd's
(NEC DVD_RW ND-2500A) Can I burn a file bigger than 2MB with this burner or even though the buffer...
(More)
(NEC DVD_RW ND-2500A) Can I burn a file bigger than 2MB with this burner or even though the buffer is 2MB
When I insert a blank CD in my NEC RW 2500a drive the computer re-boots and completes a disc check....
(More)
When I insert a blank CD in my NEC RW 2500a drive the computer re-boots and completes a disc check. If I leave the blank cd disc in it reboots again when it gets to my desk top. Device Manager says the drive is working OK and it has the latest drives. I'm running XP. My other ROM drive works fine. Any ideas? Thanks in advance.
Had to reinstall XP after it crashed, and now it will not allow me to define the 2500A drive to it....
(More)
Had to reinstall XP after it crashed, and now it will not allow me to define the 2500A drive to it. BIOS recognizes the drive at startup, but XP just refuses to do the same. I've tried deleting the upper/lower filters from the registry, no luck. I've tried physically disconnecting and reconnecting the drive, etc. The XP "Add Hardware" function will not load the default driver. I'm at wits end here, and will simply dump this drive and get a new one if I can't find a solution. Please help if you can, it would be much appreciated.
my NEC DVD±RW ND-2500A will only read dvd's or burn dvd's. it wont reconize that there is a...
(More)
my NEC DVD±RW ND-2500A will only read dvd's or burn dvd's. it wont reconize that there is a blank cd or audio cd in the writer or any cd if that matters. so in short i cannot play or burn cd's. I have tried reinstalling the firmware and cleaning the plate with rubbing alcohol. does anyone know what else I can try please.