How to change the start logo - Microsoft Windows XP Home Edition

Be more cost effective to replace television

Add your logo to customize your survey. When you add a logo, it will appear at the top of every page in the survey.
Upload Requirements

• Format: JPG, PNG, or GIF
• File Size: 1MB or less

Adding a Logo

To add a logo:

1. Click the Design Survey tab.
2. At the top of the survey, click + Logo.
3. Upload a logo from your computer.
4. Once you successfully upload your image, configure the logo settings in the left sidebar:
   • Logo Size - Choose to display your logo at its Actual Size, Small (100px), Medium (200px), Large (300px).
   • Position - Choose to display your logo Above Title, Below Title, or Left of Title.

Your changes will save automatically.

Changing or Editing a Logo

You can change your survey's logo at any time, or edit the size and position of the existing logo.
To change or edit a logo:

1. Click the Design Survey tab.
2. In the left sidebar, click OPTIONS.
3. Click Logo.
   • To change the logo, click Replace.
   • To edit the existing logo's size or position, use the Logo Size and Position fields.

To center your logo:

1. Go to the Design Survey tab.
2. Click on the survey title in the design.
3. Find the Alignment field and select Center Aligned. The alignment of the logo always matches that of the survey title.

Deleting a Logo

To delete a logo:

1. Click the Design Survey tab.
2. In the left sidebar, click OPTIONS.
3. Click Logo.
4. Click Remove.

The logo will be removed from the survey.

May want to read the owners manual & sit down
at the dealer for some guidance

this logo with the dell picture can be disabled from the Bios settings ..to get there press F2 on start ..or what ever key is indicated on that logo screen for to go in set-up ..and in there under advanced settings look for screen logo ..and disable it ..after that f10 to save settings ..or in some bios editions it will ask if you want to save changes on exit ..select save changes and exit ..
just look carefully in the tabs ..cause this option is there for sure..and disabling the logo will kinda make it boot faster ..

You can turn this off in your Bios settings.
To do this, press delete when computer starts booting up and this will open the bios screens.
Go to Advanced Bios Features and look for 'Full Screen Logo Show', set this to disabled.
Some of the soyo boards will vary in how you do this so just look at what yours has in the Advanced Bios page, some you will change the Logo size to make it go away and another you switch between Logo-0 and Logo-1.
Lastly, if you are running the p4i865pe plus dragon 2 v1.0 board and/or bio version 865dp1a2 there seems to be no way to get rid of it (updating that bio version to the newest one may change that though)

Hope this helps you resolve the issue!

The logo is built into the Bios Chip which is used to store hardware startup settings and data about your computer to enable starting up. I doubt it can be changed.

first backup bios make your own logo 640 * 480 16 color *.bmp image download bios logo changer and write back . its make your medical laser dead if any mistake

try using another format for the logo which makes it a smaller in size KB wise

Ok I figured it out...Go Start --> Settings --> Phone --> Select the band tab --> then change select network type to AUTO, and GSM/UMTS to Auto as well...SOrted, now I can see my 3G logo!!

There is no way of doing this that I know of.