KEEPS TELLING ME I NEED TO SET THE TIME AND THEN I SET THE TIME AND THEN WHEN I TRY TO USE IT IT JUST KEEPS GOING BACK TO SET THE TIME AGAIN

Push clock put time in and push clock again

if opening the door and closing it again wont clear this message, you have a door switch fault that will need to be repaired by a appliance tech

Have a look at the manual


Download Center Download Software Firmware Drivers Manuals Samsung

You're going to need to replace the oven

It seems silly but its just telling you your food is cooling till you open the door or hit cancel

Ours just started doing this exact same thing this past Friday - 12/11/09. What's going on? The cook power just starts beeping all by itself and going from 10 down to 1 over and over again. It may stop momentarily, but then starts again within a minute or so - it's constant until we unplug it. We plug it back in and within a few minutes it starts doing it again. What gives?

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again. If that doesn't work, leave it unplugged for maybe an hour.

If you still have trouble, contact Danby Customer Service US / Canada.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Press "Clock", type in the time on the keypad and then press "Start". The clock runs a little slow (at least on mine) and I have to reset it about once a month. It gets about 10 - 15 minutes behind after awhile.

The first thing to try is a "hard reset". Unplug it from the power line for a few minutes, plug it back in, set the clock, then try again.

Let us know if the hard reset doesn't fix it.

We're happy to help and we appreciate your thoughtful rating of our answer.