Question about Toshiba TLP 261 Multimedia Projector

1 Answer

Toshiba TLP671 - lamp red LED

Our projector lamp keeps cutting out after about 2 minutes when it seems to be at full brightness. The lamp is working fine and then after a short bit of time it shuts off and the lamp LED light turns red as well as the ON LED. A minute will go by and it puts itself in standby and then it comes on again. What would be causing this problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers
Re: Toshiba TLP671 - lamp red LED


It is problem with temperature. So please check with filter and clean it. Other wise check any of the fans are not functioning properly. So check the same and replace

Posted on Apr 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Toshiba TLP-T60M fan error

I just had the same problem, you have an idea on this?

Nov 26, 2012 | Multimedia Projectors

1 Answer

Hi I have a Sanyo PLC-XP18 projector and it has recently developed a problem. I was watching a film the other night and the projector just cut out. Now when i try and turn the projector on the the fans...

READY light is green when the projector is ready to be switched on
LAMP is dim when the projector is ON, but goes bright when it reverts to STANDBY.

Check that the lamp cover is fully down and the cover switch is activated

Feb 28, 2011 | Sanyo PLC XP18 Multimedia Projector

1 Answer

I have the model TLP WX 2200 and doesn't turn on and after a few minutes, the ON led is green, is blindnig and a bip is heard. After a while, the two of three leds ( on and lamp ) are getting red. What...

It seems lamp is dead/ broken in projector, please check lamp and replace it to fix the problem.
There is lamp cover at bottom side of projector, remove lamp cover to take out lamp.
Detailed procedure of lamp replacement is written in user manual page-45
Click Toshiba Support link to download user manual free copy, if required.

Nov 10, 2010 | Toshiba TLP-WX100U LCD MOBILE PROJ WXGA...

1 Answer

Main lamp Stops working.

it does sound like your lamp due to the led's. Check how many hours you have on the lamp. You should be able to do this in 2 minutes. Also check to see if you if you need to clean your filters.

Jun 07, 2010 | Hitachi CP-S210W Multimedia Projector

2 Answers

InFocus LP120 Powercycles/Shuts Off/Does Not Stay On

what is the led doing? what coloris it? and if it is blinking, how many times? this will tell you the problem.

green (flashing and solid)- all is well
red flashing:
1 time- lamp won't strike after 5x
2 times- lamp has over 2000 hrs. replace lamp
3 times- lamp failure. replace lamp
4 times- fan not working.
5 times- projector running too hot. needs cooldown
red led lit solid- undiagnosed issue. send in for repair.

if your projector is under 2 years old, it's under warranty, but it seems unlikely.

Aug 10, 2009 | InFocus LP120 / 1000 Lumens / XGA / DLP...

1 Answer

Toshiba MT8U projector strikes lamp then goes out

it's the ballast or power supply. the lamp gets about 250vdc until it reaches a certain point, then it drops to about 20vdc, but the high strike runs through a different part of the ballast than the maintenance voltage.

Jul 07, 2009 | Toshiba TLP 680 Multimedia Projector

Not finding what you are looking for?
Toshiba TLP 261 Multimedia Projector Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Multimedia Projectors Experts


Level 3 Expert

2236 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Toshiba Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides