At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to fix display on Clock/timer? It has become too...
The same happened on my oven. The only remedy is to change the display unit. A fairly simple job if the part is available, but best to weigh up the price and cost of repair versus a new oven.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is a logic problem or at least electrolytic capacitors that dim the display too far. The display could be repaired if it isn't a ic (logic) problem if it is then you need the whole display replaced
Whether it's available as a separate part, assembly, or if you have to order a whole controller is determined by the model number, which you did not mention.
You can find handy exploded views and order parts by model number here.
We're
happy to help you with free advice and we'd appreciate your thoughtful
rating of our answer.
You haven't specified which Whirlpool model you have, so I can only give a general answer which would apply to the same fault on any device with an electronic clock.
The only fix is to have the timer circuit replaced.
It's a solid state timer and non-adjustable, but can become inaccurate if the oscillator crystal goes out of tolerance. Considering the billions of timer circuits manufactured, there are remarkably few which suffer this fault, so you've just been unlucky.
Hi try unplugging form mains for an hour this will reset any settings back to factory settings let me know what happens after doing this then i can assist you further ok
×