I am an end-user of the Nortel T-7316. How can I turn off the tone before the paging or turn off the paging all together. It is very loud and intrusive when on the phone with clients.

Try this

Tone dialing allows your telephone to communicate with devices and services that respond to tone signals, such as answering machines, fax, or automatic switchboards. Want to learn how to switch from pulse to tone dialing on the Nortel phone? Follow these simple steps.

While on an active line, or after selecting the line, press # and the phone will switch from pulse to tone dialing. After you hang up the phone, your phone will return to pulse dialing. You may repeat these steps as needed.

You would need to log in as the voicemail admin using "Feature 983" followed by 102 (if you have 3 digit extension numbers) then the voicemail admin password. From there you can select MBOX and reset the password to 0000 for the mailbox in question.

You can adjust your ringer volume by using Feature *80, then using the volume bar to adjust it.

On most older nortel systems you can use the feature,*,6 buttons to adjust the ringer type, along with type you can set the volume by using the up/down volume buttons.

Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Press Feature * 3
press the 5th line key you want to use for paging
enter the page-all code (feature 601-603 as you wish)

The following website will help you with the operation and programming of your 7316:

http://www.telephonemagic.com/phone-support/norstar-feature-programming-code.htm

This link will allow you to display and save a copy of the 7208 User Card:

http://telecommunications.tamu.edu/userguides/M7208_16.pdf

Finally this link will take you to a site that will have user cards for the phones as well as manuals for the programming of the Norstar Call Manager User Guide:

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

These steps should allow you to resolve your issue. If you do have further problems please don't hesitate to let us know. Thank you for the opportunity to assist you in resolving your issue.

The Nortel 7316 set is propriatary which requires the nortel system in qrder to work., The pulsing lights are the set reacting to the standard line voltage.In order for it to work in your house you'll have to install the nortel phone cabinetand then attach the set(s) to it.

No, the T7316 set is digital, this is the reason why you cannot just take it home and have it work. Two different styles of signalling. The T7316 set only works with Nortel Systems.

Configuration>lines>auto-privacy>change