Question about Samsung LE32R41BD 32 in. HD-Ready LCD Television

1 Answer

Rf2 outlet from sky hd box

Ive just changed my television from a crt tele to an lcd tele in my other room but the rf2 exit from my sky hd box will not work ive checked all connections from the hd box all are working this lcd tele is a straight change

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 325 Answers

On your sky remote

0 1 select
make sure the rf is set to on
Remember the channel rf number,

go to your television the link is to.
go to menu then setup and then manual tune
select the channel you want to view sky on. normally channel 6 on your analogue
then go to Channel type in whatever the rf setting was on your main sky box then press save.

that is your telly sorted out. if you have a magic eye connected at the link end you should see a red led light lit up.
if not remove the magic eye and connect it straight into the back of your sky box RF2
just to make sure that the eye is not at fault.

hope this helps
ill check in a day or two to see if you need more help.


Little Dish Fitter

Posted on Sep 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I tune my TV in the kitchen to my Sky box in another room.

Sky box stuck in Stand By on red light Sky Box Guides faq

Sky Troubleshooting faq

either you have it hooked up wrong or skybox doesnt allow 2 screen use,you may need another skybox

May 14, 2015 | Televison & Video

1 Answer

I cant view my sky channel on my tv

So you want to view your sky TV in a different room?
You can achieve this a number of ways.

Purchase the multi-room package from Sky TV. This will give you fully independent TV reception in each room. (Basically two sky boxes)

Purchase a TV sender which will wirelessly duplicate the output on the TV to another device.

Connect your Sky box to a second TV with high-quality co-axial aerial cable connected to the RF2 output on the back of the Sky box.

Mar 13, 2015 | Televison & Video

1 Answer

Can you watch the same sky channel on 2 tvs

Yes if you use the rf2 out on the box, cable it to the aerial input of the tv in the other room using uhf coax cable (aerial cable), and tune the tv in analogue mode (not freeview but the old analogue) to the sky box. It's usually on CH68 but if you do an autotune it should find it. Of course you will only be watching in SD not HD on the second set.

Jun 19, 2014 | Computers & Internet

1 Answer

I have a sky hd+ box in my lounge and wish to make the sky work in my bedroom, I am happy to only watch what is on the lounge tv in the bedroom (not have multi room) thanks Nigel

Run a coax cable from the sky hd+ box at the rear from the RF2 coax port, and into tv in bedroom.
If you want to change channels, buy a magic eye from eBay for a couple pounds, enter sky settings, and turn power on to the RF2 output. this will supply your coax to bedroom with 9v which will power your magic rye

Oct 23, 2013 | Neet Cooler Trunk Organizer

1 Answer

I have a Sky+HD box on a unit, the opposite side of the living room to the where the tv unit is. The Sky box can only go here due to satellite dish cables. I have run coaxial cables underneath the floor...

Unscrew f connectors from LNB, and rewire to desired location, or tell sky to do it or you'll leave. They will put you through to retentions, but will end up sending someone out to do te job

Oct 07, 2013 | Televison & Video

1 Answer

Sky magic eye not working on hd

I work for Sky as an Engineer.

on your Sky HD remote:

0 1 select
make sure the power is turned ON

now go to the room you can not change the sky channels over with.
you should notice on the magic eye itself should now have a Red led light on it now. you should now be able to change the channel over just remember to press the blue sky button on the remote at the top otherwise this will not operate the sky box.

If not unplug this magic eye and try this directly into RF out 2 to make sure that its not the magic eye that is at fault. If it is working correctly then the light will appear.

Hope this helps

Little dish fitter

Aug 16, 2009 | Televison & Video

2 Answers

Viewsonic N3246W

does it only ghost on the channels that showing football only?

Apr 19, 2007 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Samsung LE32R41BD 32 in. HD-Ready LCD Television Logo

1,412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75032 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides