Kodak 8662207 - We need the a quick release plate for the tripod.

Try a plate from another tripod. I have three different tripods, and the quick-release plates are all interchangeable.

Try www.TripodQuickRelease.com for that part. There is listed the widest selection of quick releases and support more brands than any other web site I've seen.

If it's a quick release tripod you need to remove the quick release plate (Usually a release lever to the side of the top of the tripod) and then fasten the plate securely to the camera and then the plate to the tripod. Older non-quick-release tripods have a knurled screw located below the flat area where the camera is attached. If the screw is missing, get a relacement from your local hardware store - 1/4" -20. (Find a way to keep the new one from getting lost.)

Try www.TripodQuickRelease.com for that part. There is listed the widest selection of quick releases and support more brands than any other web site I’ve seen.

Try www.TripodQuickRelease.com for that part. There is listed the widest selection of quick releases and support more brands than any other web site I’ve seen.

There should be a release button or lever at the back or bottom of the top plate to release the quick release

I doubt that KODAK will be able to help you, but it's worth a try:
Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Good luck.

Quick release plates can be purchased on amazon, here: Amazon com Dynex tripod quick release plate. Take a look. Wish you ebst of luck.
Thomas

If you have not found the part for your tripod you are looking for, I have the whole assembly complete, still in the original box.$50 and it's yours.

Hi, quick release plate can be found easily at amazon. Click here Amazon com quantaray tripod quick release plate and take a look. I hope I have helped you.
Cheers
Tim