How do I change the bobbin winder on the Brother ls2125 sewing machine please

http://www.sewingpartsonline.com/brother-ls2125-sewing-machine-parts.aspx?utm_source=msn&utm_medium=cpc&utm_campaign=%28roi%29+brother+-+%28sku

here are 2 links for the machine that has parts

Brother LS2125B Parts

http://www.sewingpartsonline.com/brother-ls2125i-sewing-machine-parts.aspx

try these links for parts
http://www.sewingpartsonline.com/brother-ls2125i-sewing-machine-parts.aspx

http://www.sewingpartsonline.com/brother-ls2125-sewing-machine-parts.aspx

There are a few places online such as www.sewingpartsonline.com, or sometimes places like JoAnn fabrics, Sears local repair shops sell them. It is a class 15 bobbin case,

Get a free copy of the manual at www.brother-usa.com under customer support for home sewing and embroidery. It will tell you everything you need to know, save it to your computer and then you can also enlarge the diagrams to see better.

Here is the Manual for your Brother LS-2125:
http://www.brother.ca/en/products/pdf/manuals/LS2125-UG.pdf

Adobe® Reader® software is required to view the previously mentioned PDF document. Ensure that you have Reader installed before attempting to open any PDF files.



I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Download free manual here - http://www.brother-usa.com/manuals/default.aspx?PGID=3&R3ModelID=LS2125

Slide the front left section of the sewing machine bed to the left.

Open the door.

It should be just these three places!
Make sure your machine is lint-free before you oil, and don't use more than just a drop on each place!

Disassemble your bobbin case....



You have to unscrew the top....



And pay NO attention to my leg!

Happy sewing!

i bought a new brother stiching machine ls2125. when i started to stich the same no stiching is coming only the mark is coming. why?

Don't go directly from the thread spool to the bobbin.
You have to go via the thread quide, (near the end of the head at left side) and under the small roller.

Pass your thread to the bobbin turn your thread 3 turns to the right, clockwise,
then pass the end of the thread, under the coming thread and give it another 3 turns to the right.
For better results, always remove old thread from bobbin before filling it up.
Push the thread winder lever to lock the bobbin.
Start winding slowly. If the thread is loading in the down position,
put your finger under the thread between the bobbin and the the thread quide, untill you see that the thread is feeding evenly.