Question about Miscellaneous
If the camera refuses to format the drive, it may be bad. You could take it out of the camera and install it in a laptop or pc, and try to format it there.
Posted on May 01, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Please try to check with your cmos system if it was detected, if not means your harddrive was absolutely damage.
Please rate me solved!
Posted on Nov 17, 2007
Are you formatting a new disk or an existing one? Keep in mind that the rest of us do not know all the details that you know unless you tell us & thus it will take much longer to resolve your issue.
You said "after you tried it with XP CD". Dont know what you mean. What program did you use the first time & what steps did you do?
Posted on Nov 24, 2008
SOURCE: formating hard disk
IF the old PC motherboard will recognize the drive while booting up, Windows 98 will also see the drive after boot-up. You may have to reformat the drive into smaller partitions.
All you have to do is physically install the drive in your old computer and attempt to boot. After the computer boots up, if the drive does not show up shut down and put the drive back in your old computer. Use the manufacturer's partitioning software available on their website to change the drive from one 250 Gb partitions to five 50 Gb partitions.
Posted on Feb 15, 2009
Remove the HDD from the Bay, and install it in a PC, as an extra drive, then see if you can access it that way just to get all you data!
Posted on May 25, 2009
SOURCE: how to format IDE hard drive?
This drive is an IDE drive. The jumpers can be set on it to make it a slave.
Once set as a slave, you can identify the drive letter given to this drive and format it either at a command prompt: C:> format [drive:] /s (to make it bootable) or no /s to just format it.- OR within Windows: right click on the drive letter and select format.
Posted on Jun 18, 2010
Tips for a great answer:
Nov 03, 2013 | EverFocus EDVR16D1/500 16 Channel, 120...
Sep 18, 2011 | Sony Handycam DCR-SR100 Camcorder
Feb 28, 2011 | Sony DCR-SR65E HDD Camcorder
Dec 12, 2010 | Sony Handycam DCR-SR100 Camcorder
Mar 02, 2010 | Sony Handycam DCR-DVD201 DVD Camcorder
Jan 26, 2008 | Seagate HDD 40GB 7200RPM ATA100 2MB...
May 05, 2007 | Seagate Barracuda ATA IV (ST340016A) 40 GB...
Jun 21, 2018 | Miscellaneous
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: