Step1: Check printer is powering on or not., if not check the adapter.
step2. Any error lights are blinking on panel?..check
step3: Cartridges are conditioned or not?.. if not,replace them..
step4: If every thing is fine, check for copying..if copying happens properly..go to next step.. or else go to step2 and check once again properly..
step5: check proper drivers in system., or else
step6: un install existing drivers.
step7: connect usb cable check for new hard ware found popup.. if not check usb cable..
step8:Install full feature drivers from below said link:
http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-F300-All-in-One-Printer-series/1129389/model/1129390#Z7_3054ICK0KGTE30AQO5O3KA30R1
94 views
Usually answered in minutes!
×