Question about Sony Televison & Video

1 Answer

I hv 32 inch sony lcd that has a problem after power on 6 times blinking

I hv 32 inch lcd that 6 times blinking so what can the problem in lcd thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sony Master
  • 73,631 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Posted on May 01, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony LCD KLV32BX35A 5x Blinking Problem.


When an LCD TV turns on for a little while, and then dies, problem usually capacitors or IC's in Power Supply section, specifically diode bridge in Inverter board, or T-Con timing board.

Jul 17, 2014 | Sony KLV-32BX300 32 inch Multi-System LCD...

1 Answer

I have a Bravia Sony KDLV32XBR1, the red light is blinking 6 times then quits and starts over.


Power low of main power supply 10.5V line PLEASE CHECK 10.5 v supply your power supply board is defective

Dec 29, 2013 | Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV

1 Answer

Has verticle lines and turns off.


SONY LCD TV 32 inch, Display problems. Display half white colour.

Jan 20, 2012 | Sony KDL-32M3000 32 in. LCD Television

1 Answer

I have a 42 inch t.v. that I mounted on the wall, after 6 months the picture started flashing/blinking. When I removed the t.v. from the wall it stop briefly. I have to turn the t.v. off and on numerous...


Tv is new only 6 months old?Yes take ur warranty repair service.The tv have 2 long LCD inverter boards problems,to causes the LCD screen panel to flashing/blinking or it is the causing by a bad power supply board,that the board where the a/c power cord plug into it.

Apr 21, 2011 | Digital Lifestyle FA1B32Z 32 in. LCD...

1 Answer

KP-51WS500 Flashing 6 Times


Well, it's DEFINITELY the High Voltage power supply is DEAD! Won't start up...or goes into OVERVOLTAGE SHUTDOWN....

Most of the time it's overvoltage problems...

The KEY to knowing which one is actually occurring is the amount of time it takes before the 6 blinks occur...

A DEAD HV circuit takes a lot of time, while the OVERVOLTAGE will take less than 40 seconds for it to register the 6 blink code....

In this case (overvoltage) replacing the HV oscillator/regulator IC is mandatory...

A dead HV circuit could be anything in the HV circuit, from the Regulator IC to the HV splitter...
It's really wiser to consult a TV technician on this....

Mar 25, 2009 | Sony KP-51WS500 51" Rear Projection...

2 Answers

Sony Wega 40" TV will not turn on, standby light blinks 6 times repeatedly


Hello,For model KV-40XBR800,

Pls check following area.

Low HV Shutdown:
On the D Board.
Check IC8004/pin 7 should be 7.4v.
Check IC8006/pin 2 should be 2.5v if lower will trigger shutdown by causing pin 1 to turn on.
Check IC8006/pin 3 reference voltage 2.2v.
IC8006/pin 1 normally at 0v. If high
turns D5007 ON which turns the latch circuit Q6532,
Q6530, and Q6527 ON and turns the AC relay RY6501 OFF.

And NOTE: 6 blinks also can be Low B+ protection.

Unregulated 7.5 v from the power supply to 5v reg IC504 on the A Board. 5v to M Board Q2314

to CPU IC2300/pin 43. If 5v missing set will shutdown with 6 blinks.

Good Luck
Dals123

Oct 05, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Sony KDF- 42WE655 Blinks 6 times No picture or sound


was there a smell? it might be main transformer the front blinking led means the set in is safety mode and wont boot up because of a fault

Aug 25, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

No power


It sounds like the backlight or an inverter board on the television may have failed. Check your warranty status on the television to see if you can get it repaired by the manufacturer for free.

Sep 06, 2007 | Sony KDL-32S3000 32 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...