Question about Novastor Novabackup

2 Answers

Am I a legitimate owner of this program. Reason - I have bought the program six times today and the application failed each time

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Novastor Master
  • 5,631 Answers

I don't understand your reasoning And don't know what is your question. If you bought that unspecified program and it failed the first time, why did you pay for it 5 more times?
By the way, please remember that when you pay for a program, once or six times, you don't buy the program: you are paying for a license to use it. Should be enough to pay once and they should provide you a program that works.
By the way, provider should give you some technical assitance to get running the program after the first time you payed for it.

Posted on Apr 29, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Novastor Master
  • 10,875 Answers

Go here and figure it out,if you bought with a c/c,then dispute all of the charges,, We re here to help

Posted on Apr 29, 2015

  •  johnny rebel
    johnny rebel Apr 29, 2015

    check your email for the code to nova backup


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How can i block imei number

You will need to contact the manufacturer of the device, most of the time this number is set in place to stop ******* activity (stolen devices) from being activated after an activation lock has been issued so this is not an easy task.

If you have a legitimate reason for wanting to change this it will be up to the manufacturer to help you do this. It may take a court order depending on what the reason is.

Jan 01, 2015 | iPhone Apps

2 Answers

Fan is running all the time just started 1 day ago after computer fixed a problem

All the computer fans run 99.999999% of the time. It may be getting louder and therefore more noticeable. Dust build up over time can make your computer running hotter which would require the fans to run faster if they are varible speed vans (have a 3 or 4 pin connector)

Jun 12, 2012 | Acer Computers & Internet

1 Answer

Password on hdd

Passwords on Hdd in 99% of the times represent a stolen computer. The hard drive was locked either remotely by the original owner to keep thieves from getting to sensitive data. One percent of the time a legitimate user put it on and does not remember the password. If you can't put in the password to unlock it the only other option is to install another hard drive, operating system, drivers and application programs. Maybe these guys at: can help you at a very economical price.

Mar 09, 2012 | Dell Precision 390 PC Desktop

1 Answer

The application i got needs an activation key

Well assuming you legitimately got this program you can usually find the key in the instruction Manual, jewel case or some slip of paper in the box, if you bought it online you should be able to request it from the site you bought it from

Jul 05, 2011 | Video Game Consoles & Games

1 Answer

Microwave does not heat if time is less than 1 min 30 seconds

Generally speaking, charcoal filters should be changed and grease filters should be cleaned about every six months, or whenever you notice they are getting dirty & clogged. Yours will likely have one or the other - probably not both - depending on whether it's vented or it recirculates.

A clogged filter will cause the supply of cooling air flow to be lessened, allowing the magnetron to overheat. It only takes one severe overheating to damage or destroy a magnetron.

One common way for a magnetron to fail is that its heating power is less and less, then it just stops heating.

Magnetron's will usually have a warranty of 5-9 years, but you'd still have to pay the installation labor.

You can save a $75-90 home visit by removing the oven form the wall and taking it to a local Whirlpool-authorized warranty servicer.

The date of manufacture will be on the model tag in the unit, and the warranty terms will be in the owner's manual. Many manufacturers will use the serial number and date of manufacture to validate the warranty in lieu of a sales receipt.

You can download Whirlpool owner's manuals and installation instructions here.

You can find helpful exploded view diagrams and order parts and accessories by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jun 26, 2010 | Whirlpool WMH1162XV Microwave Oven

1 Answer


try to start the car and unplug the coil packs one at a time. listen for changes in the way the car runs. it sounds like you have a dead cylinder or two. be aware of VERY small changes in the sound as i had mine running on 2 of six cylinders and it still ran. if you notice that you have a dead cylinder check the coil packs for corrosion on the connectors if they are fine. investigate the ptu (on the passenger side timing belt cover there are 2 versions the old version is known for failing and knocking out a few cylinders's/PTU%20Repair.pdf

rough idle could be caused by vacuum leaks and or incorrect timing should be 15 degrees before tdc

Dec 13, 2009 | 1990 Nissan 300ZX

1 Answer

Timer doesn't listen!

Do you have all zones set for the same time? Hope not. Make sure you have program 'A' only. You might have a different program set with different times in 'B' program.

Jul 04, 2009 | Intermatic EH40 Energy Controls -...

1 Answer

Transponder chip in key fob

This will all depend upon what country you are in, and if the vehicle even has the need for the chip to be programmed at all.

When you put a proper key in the ignition, is there a antitheft logo that cycles with the other indicators?

VW antitheft indicator in the USA often looks like a car with a key under it

In the USA, thought the keys have a MEGAMOS RFID chip, no system was active until 2000, and on some models, not until 2002

A system requires a VIRGIN chip. Once the chip is programmed to a car, the chip is locked to that car. Some new software can unlock and refresh some chips, but not 100%

I had a client come in TODAY with a 2003 Passat, and an EBAY flip key.... I wasted a half hour programming time..... but I carry the lower half of remote, which hold the blade and the chip, so was able to fix client up, when EBAY failed.

If this was helpful, please post a nice review for City Lock in Boulder Colorado listings on Google Maps, Yahoo etc. This listing will link you to my website as well. On my website are resources for finding a legitimate locksmith near you. Be sure you are hiring a REAL locksmith!

Thank You


Feb 11, 2009 | 2001 Volkswagen Jetta TDI

1 Answer

Location of programmer for keyless entry remote?

you shouldn't need to find it. Your owner manual will instruct you how to program your keys.
usually, you get in the car, lock, unlock, lock the doors. turn the key from off to on about six times, wait for the lights to flash to tell you are in the program mode and then program each key. then the lights flash again if you are successful.

The dealer usually charges 1/2 hour to do this for you.

Dec 01, 2008 | 1991 Chevrolet Caprice

1 Answer

Can't scan anything from my Lexmark 8350 to my Gateway Windows Vista hard drive

use the win photo program to scan or use the printer application to scan to computer
how to do it is in the owners hand book for the printer

May 30, 2017 | Gateway GM5084 PC Desktop

Not finding what you are looking for?
Novastor Novabackup Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Novastor Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Novastor Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides