Question about Coby MP620 MP3 Player

2 Answers

I bought two of these and neither of them will turn on right out of box. the driver install failed once and now they arent recognized when i plug them in to charge. what do i do. i love this mp3 player type Ive used them before but never had this problem.

Posted by Anonymous on

  •  johnny rebel
    johnny rebel Apr 29, 2015

    http://www.manualslib.com/products/Coby-...

  • Anonymous Apr 29, 2015

    I already have that manual and have read it, it says nothing about my problem.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Coby Master
  • 5,631 Answers

You should not think too much: return them, claim the warranty they should have, It's obvious that a new player should not behave so absloutely failed.

Posted on Apr 29, 2015

Testimonial: "Ive already returned one and ordered another and that one had the same problem. i got them new off amazon and its a pain waiting days for the swap."

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Coby Master
  • 10,875 Answers

Take them back and switch them,but,have the store check them first,also,try charging them first.

Posted on Apr 29, 2015

Testimonial: "I returned one already this is my second try. ive tried charging them and they wont even connect. the driver install failed the first time and will not activate anymore."

  •  johnny rebel
    johnny rebel Apr 29, 2015

    take them back and get your money back,that store got a bad batch,find them online and use a c/c to purchase so they are warranteed

  •  johnny rebel
    johnny rebel Apr 29, 2015

    update the software,http://www.solvusoft.com/en/update/drive...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get my pictures


plug in the binoculars then go to control panel/device manager look for the yellow exclamation mark right click it and choose update drivers allow it to go on the internet to find the drivers. You may have a 64 bit computer with an older software that only works on 32 bit. We'll see if the manufacturer tried to make a driver for both.

Nov 25, 2013 | Bushnell ImageView 111025 Binocular

1 Answer

The USB ports (front and back) on my HP pavilion slimline s3500f, do not recognize any USB devices once plugged in. Device manager says the ports "are working properly" yet windows will not...


1. you possibly will need to update the usb drivers > Go to the 'device manager" and check the usb devices installed and update the drivers by right clicking and going to properties and go to update drivers.

Sep 12, 2011 | Computers & Internet

2 Answers

Ebookman EBM-901 not being recognized as connected on Windows 7 x64. Windows troubleshooting says USB Virtualization stub has a problem, suggests reinstalling, attempts that, then says it failed to fix...


Welcome to FixYa!

Install the drivers supplied by the manufacturer in Windows XP SP2 compatibility mode.

First, restart the computer is clean mode. The Clean Mode temporarily disables all the programs that are being loaded during the startup of your computer.
  • Click start.
  • Type msconfig in the search box.
  • Click on msconfig from the results.
  • System Configuration Window will open.
  • Click the Service tab.
  • Check the box that says Hide all Microsoft services on the lower left corner of the window.
  • Uncheck all the boxes in the list.
  • Click the Startup tab.
  • Uncheck all the boxes in the list.
  • Click on the Apply button.
  • Click the OK button.
  • You will be prompted to Restart.
  • Click Restart.

Install the driver in compatibility mode.
  • Locate the driver installer file (Application file with .EXE extension)
  • Right click on it. Click Properties.
  1. Click the Compatibility tab.
  2. Tick the check box that says Run in compatibility mode for.
  3. Choose Windows XP SP2 (Service Pack 2). Do not choose Windows Vista.
  4. Tic the check box that says Run this program as administrator.
  5. Click Apply.
  6. Click OK.
jas247_124.gif
  • Connect the EBM-901 to the computer.
  • Double click the driver installer file to start the installation.
  • You may be required to restart after the installation.


Thank you for using Fixya. Have a great day.

Jas247

Jul 21, 2011 | Franklin Electronic Publishers, Inc....

2 Answers

I bought the HP Deskjet 5650, but I'm not sure how to install it to my home computer.


First find the installation disk that came with your printer in the box. Install the software by placing the disk in your CDROM of your computer and then follow the instructions on the screen. when the software has finished installing, connect your printer to the computer with your USB cord and the computer will automatically do the rest.

Some operating systems already have the driver for your printer and the software is not necessary. To check and see if your computers operating system already has the necessary drivers, just connect your printer via your usb cord. Your computer will recognize the printer once the cord is connected and you will see a pop up message around the right hand corner of the monitor screen that says "new equipment detected" and the computer will do the rest.

Good luck!

Nov 11, 2010 | HP DeskJet 5650 InkJet Printer

1 Answer

My action replay wont be recognized!


make sure your usb cord is plugged in to your DSi AR and computer. **do not have the AR plugged in to the DSi.
then put the AR's CD ROM in.
you go to start menu.
type in device manager.
right click Dsi AR...
click the driver tab.
click update driver.
click browse computer.
then check the box [subfolders].
BROWSE.
find DSi CD ROM folder.
and voila! :D
it should work

Jul 13, 2010 | Datel Action Replay for Nintendo DS

1 Answer

I have sansa e250..but when i turn it on it goes off again..and when i plug it to the computer it doesn't read it..i don't know how to redownload the software!!can you help?


You need to install drivers so your computer can recognize that something is plugged in.
Go to this website http://www.sandisk.com/sandisk-support/driver-download-wizard.aspx

Choose Sansa - e200 series in the first box, skip the second box, and then choose your operating system for example Windows XP, then click on the find drivers icon. If the drivers fail to work it could be a component in the player itself is damaged; I would see about getting the player looked at in Walmart or Bestbuy.

Nov 13, 2009 | SanDisk Sansa e250 MP3 Player

1 Answer

CDP78 USB Device Not Recognized


HOW did you re-install everything ?

Make sure you UNPLUG the usb cable first, then UNINSTALL the drivers and all software - reboot your computer - make sure at all times your usb cable is unplugged from the device - once cleaned and unisntalled - re-install drivers and software - BUT still, do not plug the cable - ONCE and only once the drivers are installed, then plug the USB cable, inspect the USB cable to make sure it's secured. Have you tried unplugging your printer for a few minutes and plugging it in again ?

IN windows device manager do you see the device listing with a yellow exclamation mark ?

If all else fails you may have a faulty circuit board on the printer.

Sep 26, 2009 | Vinpower Digital U-Print CDP78 Printer

1 Answer

Alesis Multimix 8 USB won't be recognized


There are NO drivers to be installed for this device. Plug in the usb to the device, and the PC once the PC is running turn on the mixer. XP should inform you that a USB Audio Device has been found & installed. Any software you use for rec'ing will let you choose what sound device to use, select USB Audio Codec.

May 27, 2009 | Alesis Multimix 8 USB 8-Channel Mixer...

1 Answer

Won't work with windows Vista


right click on belkin , click on properties , click on compatibility tab
tick box , highlight the vista line , click apply click ok
that brings belkin into line with vista

May 08, 2017 | Belkin VideoBus II Video Capture

1 Answer

No Display


i can help with the computer registering it...

insert zen v plus install cd
exit out of autorun for cd
go to control panel
click on system
click on the hardware tab
click on device manager
click on portable devices
right click on your USB device with the yellow warning sign
go to properties
when it tells you that the drivers arent installed... go to the browse button and select your zen v plus install disk
hit ok and it will find the drivers that way...

as for thedisplay... once you get the computer to recognize its there troubleshoot it.

Mar 26, 2008 | Creative Labs ZEN V Plus MP3 Player

Not finding what you are looking for?
Coby MP620 MP3 Player Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coby Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Are you a Coby Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...