With Disc in, it searches, but does not play - Televison & Video

Run a CS Optics Cleaning Disc through it.

https://www.google.com/search?q=RCD134B+manual


..

Try a CD Cleaning Disc. There are two laser optics in your CD changer, a low power tracking optic and a high power reading optic. If the reading optic gets dusty, the light becomes refracted, and the read fails and stops play or ejects the disc. The discs are available on Amazon, Best Buy, and Walmart for less the $15. Do two cleans and it should fix it.

https://www.google.com/search?q=cd+cleaning+disc

..

Not all disc players will play all the different types on the market. Some DVD's will only play in certain areas of the world. This is called region coding. The number of this is found on the back of the player and on the disc or case it comes with. If you have a region 2 player it can only play 2 discs. It is possible to make some DVD players play another region or all. Search the web for information on how to change the region code on your model DVD player.
Another thing that will cause that response is using a "+" or "-" disc type in a machine that can only play one type.
Yet another cause is dirt on the disc or lens of the player.

see the troubleshooting index:God bless you


No sound
1. Check if the TV and Amplifier (if connected) is turned on and set correctly.
2. Check if the TV, DVD player and Amplifier are connected properly.
3. Make sure the TV, DVD player and Amplifier volume are not set to Mute.
4. There will be no sound output during Reverse Play / Pause / Step / Slow / Search.
5. If the DTS soundtrack is enabled in the DVD Disc Menu, but you are using Stereo Analog audio, the sound will not work. Try switching the soundtrack to Dolby 5.1 or PCM mode in the Disc Menu.


Does not play disc

1. No disc. - Load a disc into the tray.
2. Disc has been loaded upside down. Place the disc with the label side up.
3. Disc region code does not match region code of the player.
4. Disc type is not the correct type to play.
5. Disc is damaged or dirty. Clean the disc or try another.
6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.

The optical pickup unit might need replacement. Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as Service help to electronic home entertainement equipments.

Pull up older posts. You can get all details.

Site is listed in Google, and you can locate it either at the bottom part of first search page, or at the top of second page.

Click on associated ads too. Sometimes, it might help you.

your CDROM/DVDROM is not attach with your system please remove it first then inserted again.vista windows search the device and install automatically.

if window vista does not found this device then replace the DVD ROM
your lens has been damaged or expire

It seems that the search button was stick

Try cleannng machine with dvd cleanner if u have staples surplus near u it only costs 10 can cn twice thiswoked for me had a same promblem.