Question about Canon PIXMA iP4200 InkJet Photo Printer

Open Question

Canon iPF8000s error code garo w 1234 keeps coming up - why? how do i fix it

When printing error code garo w1234 keeps coming up

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnm329
  • 3 Answers

SOURCE: Canon ipf8000 won't cut paper

Check to see if the cutter module has fallen off the print heaqd carriage. A common problem. It is a blue module that snaps into the left side of the carriage. Usually if it has fallen out, it can be found in the far left end of the printer, so you have to stop the printer, lift the lid and stick your hand into the left cave.

Posted on Dec 29, 2008

Ad
  • 3 Answers

SOURCE: canon ipf8000 error code

Hold down the roll/media button and the info button while turning on, wait about 10 seconds and release roll/info buttons. You should get an S in the upper right corner. That puts you in service mode. Push menu then scroll down to maintenance then right arrow to head replacement. To get out of service mode turn off.

Posted on Jan 26, 2009

  • 79 Answers

SOURCE: resetting maintenance ctg for canon ipf8000

You can reset it from the service mode it will take you 15 sec but you can use it only for service reasons.
If you reset it there is danger to fload with ink and messed up the whole area.

Posted on Feb 24, 2009

SOURCE: Error code 03130031-2F13

lol,, see this

0a08c61.jpg00b1175.jpg

Posted on Dec 11, 2009

pineworks
  • 4041 Answers

SOURCE: Can not print to my Canon MX700 printer. Error

Hi You can Try 2 things.

ERROR 5100 means that there is some foreign object blocking your cartridges carriage that disables it from moving. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there



Next try.

It may be a piece of paper or a scotch tape or a staple wire.
Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Apr 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code GARO W1234 keeps coming up why


1. unplug data cable
2. go to service mode

Aug 26, 2015 | Canon imagePROGRAF iPF8000 Printer

1 Answer

What causes error 031300312618?


Farid: According to http://www.copytechnet.com/forums/canon/56346-ipf8000-error-03130031-2618-a.html : this is "Print Head failure.
First try replacing the Print Heads and if the problem persist, re-seat all the cabling to the Relay PCB and the Carriage Unit PCB.
A loss or faulty connection to either one of the PCB's could cause the problem. In one case, the problem was related to both a faulty Flex Cable Assembly (QM3-2005-000) and the Carriage Assembly PCB (QM3-1995-020) for the IPF8000 and (QM3-3093-000) for the 8000S.

May 14, 2015 | Canon imagePROGRAF iPF8000 Printer

1 Answer

03130031-2F52 error


my printer suddenly stopped working and is showing the following error code 03130031-2F52. If anybody know how to fix it, please email me at alaevphoto@yahoo.com. thank you.

Oct 21, 2012 | Canon imagePROGRAF iPF8000 Printer

1 Answer

Canon IPF8000..... i need to override the "ink


Before removing the used print head, be sure to update the printer?s firmware version with the included CD-ROM. An error message will be displayed on the printer?s display when the new print head is installed without updating the version. In this case, re-install the used print head and update the firmware version.

Updating the firmware

1. Turn on the power of the printer. Check that the printer is online.

2. Run the file setup.exe in the FirmUpdate folder in the CD-ROM. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from Programs in the Start menu.

4. By following the instructions, update the firmware version.



1. Turn on the power of the printer. Check that the printer is online.

2. Select the OS89 folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate]. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.

4. By following the instructions, update the firmware version.



1. Turn on the power of the printer. Check that the printer is online.

2. Select the OSX folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate].

[GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.
4. By following the instructions, update the firmware version.
Precautions when updating the firmware version
- Use [GARO Firmware Update Tool] after checking that the printer is online.
- Do not turn off the power of the printer while firmware data is being transferred.
- If the printer?s firmware is already the most recent version, the Status of the target printer will be displayed as ?Update Finished? when using [GARO Firmware Update Tool].

Techbelkin

Dec 13, 2010 | Canon imagePROGRAF iPF8000 Printer

1 Answer

We have recently purchased the iPF8000S. When the printer is networked it pauses on each line of the print job. When the printer is connected directly to the computer with a crossover cable the printer...


cheers,
It may be a NW protocol/switch/router/driver issue. I print to my 8000s on USB 2.0, since the 8000s has no Gig E. But I had a few problems trying to connect to the Remote UI on separate network card with dedicated address. So in the end I left printer with dedicated address and plugged it into my el cheapo NW switch. The remote UI connected straight away via browsers URL to printers IP address. This way I can move files amongst mailboxes and rename them etc without affecting the print spools flowing via USB. Crossover cable should not be needed either on a modern device, since it should be more intelligent and realize the direct connection, auto switching pairs as needed. If you really need to drive 8000s on NW then I'd remove driver and try setting printer IP first via LCD, then forcing Garo driver installer to search and find the printer IP when re-installing its Garo driver.
:-)

Sep 14, 2010 | Canon imagePROGRAF iPF8000 Printer

1 Answer

I have a Canon iPF8000 large format printer and a message comes up saying, "Clean Right P Head". I have cleaned the printhead as it states, but it keeps on showing on the printer screen. Because of this,...


Canon has bad heads for this LFP, it is not unusuall. Every model has this issue, canon even lower the price of head because of this.
When you replace the print head message disapears for some period of time.If Im not wrong I think that is P-01 or 03 print head involved.

Jun 15, 2010 | Canon imagePROGRAF iPF8000 Printer

1 Answer

Mystery Print Problem with Canon iPF8000


If it's within 12 months of purchase, Canon will replace free, although you may have to hound them a bit. This problem has occured twice (2 new heads) on our IPF8100 each time about 9 months in.

Mar 09, 2010 | Canon imagePROGRAF iPF8000 Printer

1 Answer

Canon ipf 8000s


Over heat of the print head.
Turn off - Turn on the machine, if this will not work try to access the service mode update to the latest firmware version and replace the print head

Dec 25, 2009 | Canon imagePROGRAF iPF8000 Printer

2 Answers

Error E02530 on Canon W8400 PG


Hello

when i load a material in printer, it shows me this error E0200B (size undetected) i loaded another photo papers and photo rolls but it steel show me the same error.
what should i do to solve this problem ?

thank you

Oct 27, 2008 | Canon imagePROGRAF W8400 InkJet Printer

Not finding what you are looking for?
Canon PIXMA iP4200 InkJet Photo Printer Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2005 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...