Merely take off the horseshoe clip from spindle(under rubber) and remove turntable. Put the belt around the circular raised area in the middle of the platter and reinstall platter over spindle. align one of the holes in the platter with the brass spindle and just pull belt around spindle. Good luck...
No power seems to be getting through. System dead, turntable will not turn. Have checked any input...
(More)
No power seems to be getting through. System dead, turntable will not turn. Have checked any input cables/fuses & seem to be ok.
The turntable will not start spinning on its own, I have to spin it to get it to start, and when it...
(More)
The turntable will not start spinning on its own, I have to spin it to get it to start, and when it does start spinning the speed is too slow. Is it just the belt?
I have an AIWA stereo PX E860 that has a turntable, tape deck, stereo and CD player. I put in my...
(More)
I have an AIWA stereo PX E860 that has a turntable, tape deck, stereo and CD player. I put in my cassette tape and can't remember how to make it play. There is no "play" button, only buttons to "clear" "set" and "direction". I can't find my manual and can't get it to play. Can you help?