Question about Televison & Video

2 Answers

I need instructions on how to program my living solutions remote atc -1688

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,635 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Posted on Apr 27, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,056 Answers

Turn on the devices that you want to program manually. Next press and hold one of the Device buttons (TV/DVD/etc.) on the remote. Release the button after 3-5 seconds. Point the remote at the device's IR receiver. Next press the power button on the remote. Now press the Channel Up or Down button on the remote until the device turns off.

Once the device turns off, press OK or Enter on the remote. Press the power button again and make sure that the device turns on. Repeat this for your other devices.

I hope this helps.

Cindy Wells

Posted on Apr 26, 2015

  • LeAnn Grace McDonald Apr 26, 2015

    definitely helped thank you very much

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Living Solutions Remote - Manual

press and hold Tv VCR or DVD wait until the red light turns on then press power. Now press channel up or down until the the device turns on if you press it again while the device is on you'll have to do it again. After that hit OK then test it by pressing the volume button

Posted on Jan 19, 2009

bobbysmema2
  • 90 Answers

SOURCE: programming a remote

    Programming a Living Solutions Universal Remote
  1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.
  2. Step 2 Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
  3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
  4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
  5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
  6. Step 6 Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

Posted on Sep 01, 2009

pabloloco
  • 2335 Answers

SOURCE: Need code for living solutions jumbo remote

The codes for a Phillips TV are: 003, 004, 006, 008, 062, 068, 069, 074, 075, 077, 086, 087, 089, 163, 183, 184, 205, 206, 207, 208, 212, & 213.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
I hope that helps.

Posted on Dec 23, 2009

sandie3796
  • 132 Answers

SOURCE: i need program codes for living solutions jumbo

I believe this link will take you there http://www.hifi-remote.com/ofa/codes-tv.…

Posted on Mar 03, 2010

  • 64 Answers

SOURCE: Need all the codes for

moz-screenshot.pngthe best i could do is a picture of the codes but they should be visable enough to read. if not i will find another way to post them as this is my first time using pictures on this site.
1hungryghost.jpg
1hungryghost_0.jpg
1hungryghost_1.jpg
1hungryghost_2.jpg

Posted on Feb 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I need a code for a Philips TV to be programmed to a living solutions remote # atc - 1688



  • Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.

  • Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.

  • Push the power button on the remote. This should turn on the device that you are syncing.

  • Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.

  • Press "OK" or "Enter" on the remote once the synced device turns off.

  • Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

Apr 26, 2015 | Philips Televison & Video

2 Answers

Need instructions to program my universal remote atc -1688


Hope the info at this website will be useful for you

www.jumboremotecontrol.com/guide_to_programming_the_remote.html

Please, let me know if it worked by selecting "USEFUL" and comenting that you could solve your problem

Apr 26, 2015 | Universal Televison & Video

1 Answer

Codes for a living solutions big remote


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls.Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order.Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Sep 21, 2014 | Televison & Video

1 Answer

I have a Living Solutions AM/FM alarm clock radio with an IPod dock, model #ATC-0899. I lost the manual and need to know how to program radio stations in


I purchased a used living solution iPod statio which works with iPhone however I am usable to set clock as I do not have owners manual model ATC 0899

Dec 23, 2010 | Home

1 Answer

Need instructions to program Living Solutions Speakerphone ATC-355


living solutions desktop phone (model unk) programing.

turn on with speakerphone button
hit store button once
enter phone #
hit store button once
hit memory button ( where number is to be stored) once
hit auto button once


to dial stored #'s
kift reciever or turn speakerphone on
hit auto once
hit memory button (where # is stores) once
wait for completion of call

Sep 19, 2009 | Lands Phones

2 Answers

REMOTE CODE


Need a code for a living solutions universal remote item#a17g1688 model#atc-1688

Dec 27, 2008 | Brookstone 538744 Remote Control

7 Answers

Living solutions remote control codes


I have a Universal Remote Control Model ATC-1311 Giant remote. I have lost the codes to and instuction book to. Can you tell me where to get at least the code for my T>V> Thank you

Mar 29, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...