Question about Nordic Track NordicTrack Elite 9700 Pro Treadmill

Open Question

Nordic Track Elite 9700 Pro Incline Not Calibrating

Just moved my treadmill and the incline/decline isn't working. It seems like it is trying, but the unit isn't moving up or down. I tried to calibrate it and can feel it try to move, but it ends with failure. Everything else is working fine.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Nordic Track A2250 Pro stuck inclined

My Nordic Track Treadmill A2250 is stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it several times. What would be my next move?

Posted on Feb 13, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lights up, start does not start on console, belt won't move , decline , incline does not work, age goes down but not up, speed does not work...pulse on handles work,,,


Do you have the iFit component on your treadmill? We had a similar issue and I unplugged the iFit component (requires opening the console and unplugging the ribbon cable that attaches the iFit component) and the treadmill started working again.

Jun 08, 2014 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Incline settings reversed


the wires for the incline motor are reversed on the board.if you follow the wires you should have 2 that look identical. reverse where they connect on the board and see .

Apr 18, 2014 | Nordic Track T5ZI Treadmill Walking Deck

1 Answer

Not incline or declining


I expect there is a limiter switch that tells the treadmill when it has reached its maximum elevation. The switch is probably either malfunctioning or broke.

Feb 27, 2014 | Nordic Track Exercise & Fitness

1 Answer

Why does my Nordic Track Reflex 4500 Pro incline automatically when I start it up?


You must tried again the s.calibration, for easy diagnose, and troubleshooting.
However you must Adjust the speed sensor, test it, clean it, and tight any plug or connector, see the diagrams attached and proceed according.
2) Lube the elevation motor, the shaft + gear, test the motor itself for open or short. see the diagram attached. If you machine use RELAIS test it for dirty, or open and repair.
God bless you
11_27_2012_10_49_15_pm.gif11_27_2012_10_50_02_pm.jpg

Nov 27, 2012 | Nordic Track NordicTrack Reflex 4500 Pro...

1 Answer

Nordictrack COmmercial 1500 console buttons don't work


http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnes

11_17_2011_8_43_24_pm.gifsincerely. Please keep me in touch.

Nov 17, 2011 | Nordic Track NordicTrack Commercial 1500...

2 Answers

Nordic Track A2250 Pro stuck inclined


My Nordic Track Treadmill A2250 is stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it several times. What would be my next move?

Apr 05, 2010 | Nordic Track NordicTrack Treadmill, A2550

2 Answers

My nordic track treadmill won't decline


My wife had the same problem with her treadmill. I turned the beast on it's side, and unscrewed the plastic casing that houses the motor, computer, and all the electronics to the treadmill. I unplugged the incline/decline motor. Then on the bottom of the treadmill the long threaded rod that causes the incline needed to be moved. So I unbolted it from the catch, and manually screwed the rod back in with a wrench. Now the treadmill works fantastically, of course the incline/decline mechanism has been disabled, but I would rather have a treadmill with the incline disabled than have one always on 100% incline. Hope you found this helpful :)

Jan 05, 2010 | NordicTrack Exercise & Fitness

Not finding what you are looking for?
Nordic Track NordicTrack Elite 9700 Pro Treadmill Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...