Question about Nintendo DS Video Game Consoles & Games

Open Question

How do i fix my dsi it has an error code can someone help plz. my brother dipped it in water

Tw737548394 is the model number oooofeoo is the error code iv tried holding all the buttons ive tried taking the battery out and letting it sit for a couple of hours so can somebody plz help me.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 78 Answers

SOURCE: my dsi reads oooofeoo on the top

This is a common problem because the DSi had a short production time it has over 100 different faults that being the most common and the least common letting out sparks everytime you charge it

Posted on Apr 08, 2010

  • 1 Answer

SOURCE: my nintendo dsi top screen reads oooofeoo what do

mine said the same i changed the battery and wall ahhh working good..

Posted on Aug 30, 2010

  • 1 Answer

SOURCE: An error has occurred. Press

I've got the same problem. So I search over the internet but I can't find anything so I went to the gameshop and they told me the shocking news dat because I did press on Update, and because of that, they blocked the NDS for using r4i cards. The card is OK, its the NDS thats blocked. So she said to me the best thing you can is sell your DS and buy a new one, or wait untill their is an new firmware that solve the problem, but no idea how long that could be. :(

Posted on Sep 14, 2010

cadillac02
  • 318 Answers

SOURCE: error code 051099"1 nintendo dsi.trying to get

Error Code: 051099Was this information helpful?

Unable to use your wireless signal

Likely cause: It appears that the settings entered into the Nintendo DS are not compatible, or the router's broadcast settings should be changed.

How to fix: Try creating a new connection with your system. Nintendo DSi owners trying to play multiplayer games will want to be sure to read the "Trying to play online multiplayer with Nintendo DSi."


Here's a link:

http://www.nintendo.com/consumer/systems/wii/en_na/errors/index.jsp


DONT FORGET TO RATE THIS PLEASE

Posted on Jan 30, 2011

Onyxfl98
  • 30 Answers

SOURCE: Hi there my son's dsi

That means the firmware is corrupted. You can contact nintendo for repair or replacement. Also in case they ask they are probably zeros (0000FE00). Good luck.

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My heli wants to fly foward as soon as it takes off. iv tryed allot of suggestions. whats my problem? cant cotrole it alt all.


you will have a trim button on the remote ? let it sit on the floor and before you try to take off click the trim button ...this should stabilize it

Apr 24, 2015 | Generic Night Hunter Xtreme...

2 Answers

Kenmore HE2 Plus fronload washer is showing F- as an error code. there are no numbers in the error code. just "F-" i cannot figure out what that means


press and hold the power button until the machine resets,then if machine resets, ok. but if machine shows a fault it should give a full fault code.adrian,,,,,,,

Jan 24, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

My keypad worked just fine but the battery died and I replaced it. All the lights on the key pad work but I can't seem to reprogram it. I press the learn button enter the code press and hold enter the...


Sometimes theres a tiny reset button hidden in the batt area. Are you positive that the new batt is fully charged silly Question but Iv\'e gotten burned on special size batts its like the sit on shelf and no body cycles their stock...Im assuming the manual is nowhere to be found? Almost is like I had a remote to a blue ray that was acting crazy turns out one of the buttons was being pushed constantly and not letting any other logic take its place have you ever changed batt before? what happens if you putt old batt back in? What does it take on your end to "reprogram" it? this odd of results may require a phone call or a downloaded manual from the internet. How did you know to enter the learn mode? is there a users manual but not a trouble shooting manual? Ive heard that powering it up and entering the model # directly after auto prog\'s logic also some times holding 1 and enter or 1,0, and power// or 1and power. hope at minimum I gave you a few options (damn this digital world!!! ) good luck friend let us know outcome...S

Jul 29, 2014 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

This OOOOFEOO code pops up, and it won't work


Turn on hold down all buttons except for power and dpad for ten sec then hopefully code will go away if this doesn't work send it in cuz you can't fix it your self

Apr 16, 2013 | Video Game Consoles & Games

1 Answer

My harmony 200 remote logitech needs reset it keeps blinkng


  • It's in safe mode
  • Remove a battery
  • While holding the 2 button on the number pad section of the remote, replace the battery
  • Let go of the 2 button
  • This will take it out of safe mode
  • The device buttons will stop flashing and the remote will work

Dec 06, 2012 | Logitech Harmony 550 Remote Control

1 Answer

I change the battery of my golf 3 1996 the radio stacked in the safe mode HOW TO INSERT THE CODE THANKS


Turn on the radio so it says SAFE.Press and hold the MODE and SCAN buttons simultaneously for a few seconds until the display says 1000. LET GO OF THE BUTTONS.Enter your 4-digit radio code using the first 4 buttons on the radio. For example, if your code is 0213 press the 1 button once to clear the one - it will be blank. Press the number 2 button twice, the number 3 button once, and the number 4 button 3 times.Press and hold the MODE and SCAN buttons again simultaneously for a few seconds until it displays a radio station, then let go. I believe if you screw up you get one more chance to re-enter it before you have to let the car sit with the radio on for an hour.

Oct 15, 2012 | 1996 Volkswagen Golf

1 Answer

I cant restart nokia n79 becase forget pasword pls help


try to format the phone by pressing and holding * , 3 , green button together this will hard rest the phone but you'll loose all your data..

Sep 30, 2010 | Nokia N70 Cellular Phone

1 Answer

My Canon printer status monitor shows the printer has an error code 5100. I cannot find any reference to this in the manual. The printer does not power up. I have tried to unplug it to no avail.


The error 5100 indicates that there's something obstructing the movement of the cartridges. You need to check everything, like gears, Timing Strip, carriage, etc.. After cleaning everything and verified that there's no foreign particles like pieces of paper, or etc.. etc.. try this :
  • Turn off printer
  • Hold down Resume button and press Power button.
  • Keep holding down Power button and let Resume button go.
  • Press Resume button 2 times then let BOTH buttons go.
  • Green lights will flash and then stop blinking.
  • When green lights are solid, press the Resume button 4 times.
  • Press the Power button and the printer should turn off, if not, press the Power button once more.
  • Your printer should respond as normal
These steps varies from model to model, so if you need further help, let me know with the model number of your Canon.

Good luck.

Thanks for using FixYa.

Aug 23, 2010 | Office Equipment & Supplies

1 Answer

Iv tried to reset it while hooked to the computer but same thing


if its detected as a removable drive,format it...
if its not,try connecting to pc while holding the "volume -" button...
if its still not detected in philips device manager,i'm sorry!

Aug 31, 2009 | Philips SA5125/37 MP3 Player

3 Answers

Need to input my radio code on 2005 Honda Civic


ok your radio displays ERR , OK 3 options let it sit for an hour turned on , to reture to CODE display , or pull the radio fuse out for a minute and put it back in , returning to the CODE display , or disconnect the battery for a minute , returning to the CODE display . you got the ERR display because the code was wrong or not entered correctly , make your choice of getting the radio back to the CODE display by 1 of those 3 choices , while the radio displays CODE , use the preset buttons , if the first number of your code is 4 , then press the #1 preset button 4 time , when the first number has been input , put the 2nd number in by pressing the #2 prest button , if 2nd number of code is 8 , press the # 2 preset button 8 times till the # 8 is displayed , and so on . you see where this is giong ? when you have entered all the numbers correctly you will have you radio back . when you say you have the radio code , good luck ! were rooting for ya .

J5

Jan 19, 2009 | 2005 Honda Civic

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

899 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...