Question about Office Equipment & Supplies

1 Answer

MY PRINTER DOES PRINT BUT NOTHING APPEARS IN TEH PAPER I HAVE ALREADY FILLED THE TANK WITH BLACK INK?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Office Equip... Master
  • 6,161 Answers

Get rid of the cartridge and buy a official cartridge certain machine read chips on the cartridge to know if new, printers see your cart as old!!!!!!!!!!!

Posted on Jun 02, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 68 Answers

SOURCE: Printer "prints" but when it's done, no ink shows on the page.

When you filled your cartridges were they empty? If so there is a good possibility that the nozzles are gummed and dried up. If you are going to fill them yourself watch the indicator that comes up on the screen it will tell you when you are getting low. If you get a low indication fill it asap. This will keep your nozzles wet and free flowing. Waiting until its empty can cause them to gum up and altimately dry out. My solution is to go to the store buy brand new cartridges. Go through the the full set up that your manufacture recomends. This means using the install new ink cartridge utility that came with your printer. Print a test page and print a nozzle aligment page. Just remember never let your ink completely run out before filling. If you follow this you will never run into this problem again.

Posted on Sep 21, 2007

  • 1 Answer

SOURCE: PRINTING WITH BLACK INK CARTRIDGE ONLY; COLORED CARTRIDGE IS EMPTY.

Apparently, if you hold the "resume button" (the one next to the power button) for about five seconds after you get the message saying to replace the color ink cartridge the machine starts printing. I did this after I went to "maintenance" under "preferences" and changed ink to "black only." At first that alone did not work, but after trying the resume button for 5 secs it worked okay.

Posted on Feb 21, 2009

  • 1 Answer

SOURCE: how to fix my canon pixma ip1000 printer will not print black ink

replace the printer head....

Posted on Jun 25, 2009

Danieldesmon
  • 56 Answers

SOURCE: Canon MP190 not printing using only black ink, color ink finished

hai there...you try press the reset and colour button in the same time...the printer will back to normallyl

Posted on Mar 01, 2010

  • 1 Answer

SOURCE: dell 926 photo printer will not print black ink.

Nope, not the cartridge...swapped out known good cartridge from our other Dell 926, still the same problem...printer will not print black...both carts work fine in other Dell 926

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pixma 1500 and I need to print black and white prints. I am using edible paper and edible ink. Instead of black and white I am getting pinkish gray instead of gray. I was told before that I...


Apparently, when grayscale printing is selected, some color ink is still used which is why you are getting a pinkish gray color instead of just gray. Here are instructions for solely using the black ink tank.

Print using pigment black ink only (Windows)
Instructions to print using only the pigment black ink tank only. Occasionally you may need to print using black ink only. Using grayscale alone does not provide this option and the color inks will still be used. By following this procedure you may print using only the pigment black ink tank.

Note: Some color ink will still be used for print head maintenance.

Note: Image quality may be sacrificed when printing photographs.

Open the Properties / Preferences window for the printer.

For Windows 7
Click 'Start' from the bottom left of the Windows screen, and 'Devices and Printers .'
Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.

For Windows Vista
Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel', 'Hardware and Sound', and then click on 'Printers'. Note: If you are in 'Classic' view, Click 'Printers' directly from the 'Control Panel'.
Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.

For Windows XP Home Edition
Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel,' 'Printers and Other Hardware,' and 'Printers and Faxes.'
Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.


For Windows XP Professional Edition
Click 'Start' from the bottom left of the Windows screen, and 'Printers and Faxes.'
Click your right mouse button on the listing for your printer, and then select 'Printing Preferences...' from the menu that appears.


For Windows 2000/ Me/98 (if applicable)
Click / Select 'Start' from the bottom left of the Windows screen, and 'Settings,' then 'Printers.'
Click your right mouse button on the listing for your printer, and then select 'Properties' from the menu that appears.

Click on the Main tab.

Select 'Plain Paper' as the Media Type. If any other paper type is selected, color ink will be used to create black.

Apr 23, 2011 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

I replaced the clear ink tank on mx7600 and the message "the clear ink is empty" will not go away nor will it print in black. The brand new Canon brand clear ink can be seen on the ink tank itself and in...


Yeah, me too. I fiddled with cycling the power, removing and reinserting the tank, doing maintenance tasks like cleaning the jets, yadda, yadda, no dice. New full Canon tank displays empty. Boo.

I figured "What the heck, I'll try printing anyway" and sent a test page on plain paper. It warned me the tank was empty, then did a bunch of those cartridge moves it likes to do (you hear the carriage moving around cleaning or something). After like 90? seconds of cleaning noises, it figured out that the tank was full, the status went to full, and it printed the page fine.

So my advice is, try printing a page anyway.

Oct 20, 2010 | Canon PIXMA MX7600 Multifunction inkjet

1 Answer

I run all the diagnostics on my printer and the paper goes through and it acts like it's printing, but when it's done, there's nothing on the page. I'm not very happy the ink is not cheap for this piece of...


I think your problem is the print head. Your cartridges are tanks with ink in it, but when the print head is clogged, no ink will come out on the paper, because in can't go through. So what you need to do is to clean the print head. Go to print properties, find the tab named "maintenance". There should be an option called "head cleaning". Click on it and follow the instructions. Your printer will start cleaning the head and as a result, it should print a paper with 4 colors: black, yellow, magenta and cyan. If it comes out right, start printing. If not, repeat the process until you get a satisfying copy. But, you should also know that cleaning the print head uses a lot of ink, so it could empty your cartridges.
My advice is to print something at least once a week. If you do that, you shouldn't have any problems with your print head anymore.
Hope that will help!

Mar 11, 2010 | Epson Stylus CX4600 All-In-One InkJet...

2 Answers

Why does the printer use one black cartridge and not the other? Is there some way of instructing it to use the left hand one too?


the pixma printers use the large black tank in most modes like text and standard (default) or fast photo printing .. thats most economical when you are using just plain paper .... it will switch to the small black tank only if you select "High" quality mode .. that black matches the nature of the color inks much better and results in really good color pictures if you are using Gloss or Matt high quality photo paper .. you can select the quality level by the following ... when you start to print, a window comes up where you can select which printer you want ... at the right of this window is "preferences" .. click that .. now select the type of paper and "High" quality mode .... now the printer will slow down but will provide really nice results and it will use the small tank black ink instead of the large tank ....the small tank is only used for "high" quality photo prints which is only needed for high quality photo paper .. if you havent tried that yet you might want to get some glossy photo paper (either Canons or Costco has great stuff if you want a lot, like 150 sheets) but most glossy paper will work except colors might need tweeking for some ... print a nice photo in the high quality mode and you should be really impressed .. and you will be using your small black ink tank .. you might want to make the first few pictures small (2x3 inch) untill you are sure everything is the way you want it .. i usually print in the top left corner first .. then reinsert the same paper and try again right next to that .. i do that until i get the colors perfect .. then i print big .. 5x7 or even 8x10 on a new sheet... the high quality mode can be selected for just plain paper and it will use the special black ink but it doesnt result in a better picture .. so no point in doing that unless you want to experiment .. if you never print high quality photos then you will never use the small tank black ink .. it will still be used up eventually because of normal head cleaning the machine does automatically .. ...
grey scaling does not select the special ink unless you select "High" for the quality setting .. then yes you can print using that small tank black ..again it will buy you a lot if you are using High quality photo paper ... almost nothing for plain paper but at least it will allow you to use that ink .. ..

Dec 13, 2009 | Canon PIXMA iP4600 Color InkJet Photo...

1 Answer

Canon MP360 not printing


You probably need a new purge assembly, it draws some ink to both clean and prime the printhead. When it stops working you won't get any ink to the paper.

Jul 19, 2009 | Canon SmartBase MP360 All-In-One InkJet...

2 Answers

Ink and printer


You'll need to either put it back in or replace it.
You need to have both color and black cartridges in for your printer to work.
Never throw away cartridges, save money and refill them or you can take them to most any computer store for recycling.
Mark

Apr 14, 2009 | Canon Pixma iP2600 Photo InkJet Printer

2 Answers

Black ink only


Print using pigment black ink only (Windows) Instructionsto print using only the pigment black ink tank only. Occasionally youmay need to print using black ink only. Using grayscale alone does notprovide this option and the color inks will still be used. By followingthis procedure you may print using only the pigment black ink tank. Note: Image quality may be sacrificed when printing photographs.
  1. Open the Properties / Preferences window for the printer.

    For Windows Vista
    • Click/ Select 'Start' from the bottom left of the Windows screen, 'ControlPanel', 'Hardware and Sound', and then click on 'Printers'. Note: If you are in 'Classic' view, Click 'Printers' directly from the 'Control Panel'.
    • Clickyour right mouse button on the listing for your printer, and thenselect 'Printing Preferences...' from the menu that appears.
    For Windows XP Home Edition
    • Click/ Select 'Start' from the bottom left of the Windows screen, 'ControlPanel,' 'Printers and Other Hardware,' and 'Printers and Faxes.'
    • Clickyour right mouse button on the listing for your printer, and thenselect 'Printing Preferences...' from the menu that appears.

    For Windows XP Professional Edition
    • Click 'Start' from the bottom left of the Windows screen, and 'Printers and Faxes.'
    • Clickyour right mouse button on the listing for your printer, and thenselect 'Printing Preferences...' from the menu that appears.

    For Windows 2000/Me/98
    • Click / Select 'Start' from the bottom left of the Windows screen, and 'Settings,' then 'Printers.'
    • Click your right mouse button on the listing for your printer, and then select 'Properties' from the menu that appears.

  2. Click on the Main tab.

  3. Select 'Plain Paper' as the Media Type. If any other paper type is selected, color ink will be used to create black.

    win_main_plain_paper.jpg

    Note: The pigment black ink will only be used when printing on plain paper.

  4. Select the box for 'Grayscale Printing'. If the document to be printed is in black only, then this step may be skipped.

    win_main_grayscale_print.jpg

    Note: If either 'Borderless Printing' or 'Duplex Printing' are enabled from the Page Setup tab, grayscale will be created using a combination of the color (dye) inks to prevent smearing.

  5. Click 'OK' to save the changes.
The printer will now only use the pigment black ink tank.

Oct 15, 2008 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Black cardstock


There is no white ink in the printer. White needs to come from the paper.
The inks in your printer can only make your paper DARKER, and you can't get any darker than black.

Oct 08, 2008 | Lexmark P6250 All-In-One InkJet Photo...

1 Answer

Black strips when printing


I'm having the same problem, with the black strip printing on the back of each copy i make... Its very annoying. the circlular lil rubber piece that helps the paper feed out of the machine is wet with black ink. theres about 5 lil rubber things that feed the paper out and ONLY one of those seems to be wet with black ink, so everytime i print, it appears on the opposite side of my document. If someone knows how to fiz this problem, PLEASE PLEASE get in contact with me. My name is Maria M. and you can reach me by e-mail smilz922@aol.com
Thanks
Maria M

May 17, 2008 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

No ink on paper


You need a new print head.....if your pixy is 3 years oldish...only thing that worked for mine try ebay or states.

Mike

Mar 03, 2008 | Canon PIXMA iP5000 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...