Question about Cisco2921-sec/k9 2921 Integrated Services Router

2 Answers

Can CISCO2921-SEC/K9 address these needs?

Hello, Good Day. I would like to ask if CISCO2921-SEC/K9 can address the following needs: • can support 50 to 100 users • must be able to accept fiber optic connection • can record all traffic for 3 months • has built-in firewall that can allow sites for specific hours say Facebook.com: 12pm - 1pm only • can accept DSL line as backup line more than 1 line can be supported • can support VPN • can support VOIP Thanks

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Please my answers for few questions which you have raised.
· can support 50 to 100 users -- Yes it will support.
· must be able to accept fiber optic connection -- By default one SFP slot is in place with cisco2921.
· can record all traffic for 3 months -- This am not sure. You can raise the buffer size to keep the most of the logs but.
· has built-in firewall that can allow sites for specific hours say (Facebook.com: 12pm - 1pm only) - ZBF can be possible. But am not sure on time based ACL.
· can accept DSL line as backup line (more than 1 line can be supported) --- Yes i hope so it should support.
· can support VPN --- Yes it supports VPN in the Security Bundle
· can support VOIP --- Yes. It supports VOIP.
Please do rate if the given information helps.

Posted on Apr 24, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cisco Master
  • 44,232 Answers

Contact cisco via their customer service we here at fixya are not where you need to check.

Posted on Apr 23, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does CISCO1921/K9 support VPN?


It depends, if you want to setup IPSec VPN, you will need to add SL-19-SEC-K9 or L-SL-19-SEC-K9 license; if you want to use SSL VPN, you will need to buy one of these lincense: FL-SSLVPN10-K9(10 Clientless Users), FL-SSLVPN25-K9(25 Clientless Users), or FL-SSLVPN100-K9(100 Clientless Users), the exact number is up to your SSL users quantity. SL 19 SEC K9 Price Buy Cisco 1900 Series Routers License SL 19 SEC K9...

Mar 26, 2015 | Computers & Internet

1 Answer

HOW TO DELETE K9 AND IT IS SO ANNOYING ME WHAT CAN I DO PLEASE HELP ME I WANT TO GO ON THINGS BUT I JUST CANT I NEED SO MUCH HELP SO PLEASE HELP IT WILL BE SO GREAT NOT TO HAVE IT


Make sure you are connected to the internet before uninstalling K9 so your license is properly released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you choose to reinstall K9 in the future. Also, please make sure you are logged into your Windows Administrator user profile. Attempting to uninstall K9 from any other user profile than "Administrator" will not work.
  1. Click [Start].
  2. Click [Control Panel] (Note: if you cannot see this option, it may be under[Settings]).
  3. Open [Programs and Features] (Note: This will be called [Add/Remove Programs] in Windows XP).
  4. Locate Blue Coat K9 Web Protection in the list of programs and click once to highlight it.
  5. Click [Change/Remove].
  6. Click [Yes] when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL K9 WITHOUT A PASSWORD. By design, K9 will block all internet access should one attempt to uninstall K9 without using a password. Attempts to modify K9 at the registry level will have the same effect.
  7. Enter your K9 Administration password and click [Uninstall]. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to the email address on file.
  8. When prompted to reboot your computer, click [Yes].
After rebooting your computer, K9 will be completely uninstalled.

Jul 27, 2014 | Blue Coat Systems K9 Web Protection

1 Answer

How to remove k9 protection


Solution
Please follow the instructions below to uninstall K9 Web Protection. Make sure you are connected to the internet before uninstalling K9 so your license is properly released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you choose to reinstall K9 in the future. Also, please make sure you are logged into your Windows Administrator user profile. Attempting to uninstall K9 from any other user profile than "Administrator" will not work.
  1. Click [Start].
  2. Click [Control Panel] (Note: if you cannot see this option, it may be under [Settings]).
  3. Open [Programs and Features] (Note: This will be called [Add/Remove Programs] in Windows XP).
  4. Locate Blue Coat K9 Web Protection in the list of programs and click once to highlight it.
  5. Click [Change/Remove].
  6. Click [Yes] when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL K9 WITHOUT A PASSWORD. By design, K9 will block all internet access should one attempt to uninstall K9 without using a password. Attempts to modify K9 at the registry level will have the same effect.
  7. Enter your K9 Administration password and click [Uninstall]. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to the email address on file.
  8. When prompted to reboot your computer, click [Yes].
After rebooting your computer, K9 will be completely uninstalled

May 26, 2014 | YouTube Computers & Internet

1 Answer

I cannot find the default ip address for Cisco AIR-AP1242AG-E-K9. can anyone help?


Hi, The Access Point does NOT have a default ip address

below is quick setup guide to the Access Point

http://www.cisco.com/en/US/docs/wireless/access_point/1240/quick/guide/ap1240qs.html#wp41082

May 30, 2011 | Cisco Aironet 1242AG (AIR-AP1242AG-E-K9)...

2 Answers

How do I uninstall K9 Protector to enable me to get rid of 'System Tool' malware, because K9 Protector is not responding. System Tool is blocking .exe files.


These are the official uninstall instructions:



Please follow the instructions below to uninstall K9 Web Protection. Make sure you are connected to the internet before uninstalling K9 so your license can be released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you want to reinstall K9 in the future.

  1. Click Start
  2. Click Control Panel. If you can't see this option, it may be under "Settings"
  3. Click Add or Remove Programs
  4. Find Blue Coat K9 Web Protection in the list of programs and click it once.
  5. Click the Change/Remove button.
  6. Click Yes when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL WITHOUT A PASSWORD. By design, K9 will block all Internet access should one attempt to uninstall without using a password. Attempts to modify K9 at a registry level will have the same effect.
  7. Enter your K9 administration password and click Uninstall. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to you.
  8. When asked whether to reboot your computer, click Yes

After rebooting, K9 will be completely uninstalled.


Mar 05, 2011 | Computers & Internet

1 Answer

My uncle installed k9 web protection in my laptop, how can i get rid of it since i dont know the password?


Solution

Please follow the instructions below to uninstall K9 Web Protection. Make sure you are connected to the internet before uninstalling K9 so your license can be released. If this is not possible, you can continue to uninstall, but you will need to request a new K9 license if you want to reinstall K9 in the future.

  1. Click Start
  2. Click Control Panel. If you can't see this option, it may be under "Settings"
  3. Click Add or Remove Programs
  4. Find Blue Coat K9 Web Protection in the list of programs and click it once.
  5. Click the Change/Remove button.
  6. Click Yes when you are asked whether you want to completely remove K9. DO NOT ATTEMPT TO UNINSTALL WITHOUT A PASSWORD. By design, K9 will block all Internet access should one attempt to uninstall without using a password. Attempts to modify K9 at a registry level will have the same effect.
  7. Enter your K9 administration password and click Uninstall. If you forgot your password, click the "Forgot Password..." link to have a temporary password emailed to you.
  8. When asked whether to reboot your computer, click Yes

After rebooting, K9 will be completely uninstalled.



You can find many solutions over the net but dont try it else the internet will be blocked.. just ask for a new password and they will mail you... You need to click on forgot password.

Oct 13, 2010 | Dell Inspiron 1501 Notebook

1 Answer

Uninstall k9 without a password


try this instructions:

This is a totally safe way to remove k9 web protection without a password 1.) Go to http://www1.k9webprotection.com and click on the "get license" tab on the left 2.) fill that out and get the license from your email address 3.) In the email there will be a link to download k9 or just type this into the address bar http://www.k9webprotection.com/download/k9-webprotection.exe You'll need this to reinstall k9 just incase you mess something up 4.) Download an older version of k9 web protection I used K9 Web Protection 3.2.36 which you can download from the following link http://www.shinedownload.com/software/K9-Web-Protection/665.html 5.) Access the task manager (ctrl + alt + del), go to the "process" tab, find "k9filter" and end this process of course after this point you won't be able to get on the internet since you just tampered with the program so make sure you've got the license from your email, the k9 installer, the k9 installer for the older version, and these directions on your desktop or something 6.) Go to the folder k9 is installed in ( C:\Program Files/Blue Coat k9 Web Protection/ is where it should be) and delete all the files in the folder, but not the folder itself 7.) Run the installer for the older version of k9 at this point you'll enter your license and create a password 8.) Install it in the folder you emptied earlier 9.) Now you can log on to k9 and change the filtering to whatever you please or just go ahead and uninstall it Now you should be free of that horrible skank of a program If not, then restart your computer. Or you can reinstall it from the installer you got from the k9 website, get on the internet, and email me at heliumface770@yahoo.com and you and I will solve the problem K9 may have fixed this bug by the time you read this (because that's what they do best) but as of June 24, 2009 k9 doesn't stand a chance of torturing us with their nearly impossible-to-remove garbage any longer.

Apr 02, 2010 | Dell Inspiron 1501 Notebook

1 Answer

ASA 5510 sec - bun k9


Basic Commands pixfirewall(config)#hostname PIX !--- Naming the PIX is optional. PIX(config)#nameif ethernet2 fo security20 !--- Naming the interface is optional. It is recommended that you !--- hardcode the speed/duplex. PIX(config)#interface ethernet2 100full !--- Bring up the interface. PIX(config)#ip address fo 192.168.1.1 255.255.255.0 !--- Assign an IP address. Failover Commands PIX(config)#failover ip address fo 192.168.1.2 !--- IP address for the failover link. PIX(config)#failover lan unit primary !--- This unit is primary . PIX(config)#failover lan interface fo !--- The 'fo' interface is used for LAN failover. PIX(config)#failover lan key cisco !--- The Pre-shared key. PIX(config)#failover lan enable !--- Enables failover. PIX(config)#failover !--- Start the failover process. This message appears on the console:
LAN-based Failover: trying to contact peer failover_01.gifLAN-based Failover: Send hello msg and start failover monitoring

Nov 27, 2007 | Cisco ASA 5510 Firewall

Not finding what you are looking for?

Open Questions:

See all Cisco2921-sec/k9 2921 Integrated Services Router Questions

Cisco2921-sec/k9 2921 Integrated Services Router Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Cisco Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...