Question about Cooktops

1 Answer

Does anyone know more about the error codes F5 / F6 on a Whirlpool/Ikea induction hob Type: PLEAC, Model: 80123766 approx. 7 years old?

The problem is that sometimes the pans are not recognized and the hob makes a cracking sound like there is water boiling under the pan or like a shortcutting sound. Since I do not have any repair manual or diagrams, I am not sure what the cause could be. I remove the power so it resets and this works fine to remove the error code, but the pan recognition still disfunctions sometimes (starts flashing that there is no pan on the plate). Any tip would be appreciated.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 287 Answers

Call a Wirlpool dealer and give them the code. They will tell you what the problem is. I think F5 or F6 is the control panel. The last time I went to replace one I was better off purchasing a new stove.

Posted on Apr 22, 2015

Testimonial: "Thank you for the reply, they tell me it's the module. However i don't have a diagram to check this. Anyone can help me With a diagram and spareparts list."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an EKI 807.2 Glass hob. I can't turn the heat up on more than one ring without E flashing on all the Rings followed by 6


Are you sure it is properly wired? For 1 phase 230v:

1= power earth
2-3 intersected = N
4-5-6 are L1-L2-L3 that should be conected together to L

Kuppersbusch is not very cooperative about what their error codes indicate, but E6 seems to be a (low) voltage issue, so you might too check the cabling to the outlet, measure the voltage with a multimeter when you successively switch on elements

Dec 22, 2015 | Kuppersbusch Glass ceramic induction hob...

1 Answer

Induction hob not heating up. What does 5h or SH error code indicate?


if they are not steel bottomed pans they will not work with induction hob test them with a magnet

Apr 07, 2013 | Smeg Cooktops

1 Answer

Glass on neff t4243 induction hob has cracked


hi,
is it possible to replace a cracked glass on my Neff induction hob?
where would I get the glass for my Neff induction hob replaced?
is it very costly?
the model number is t4483x2/09

Feb 28, 2012 | Cooktops

3 Answers

When turning on my 2 year old Neff induction Hob T4543N1 it displays a full set of E errors and cuts out it does after two attempts corect itself and function perfectly


I had flashing Es every time I turned the hob on - got worse and worse until unusable. Neff help line useless - service call cost ridiculous. My problem was the capacitor on the 5 volt power supply had failed. 5 volt supply was at 3.8 volts. Replaced the capacitor and the hob's now perfect - a joy to use. Only helps if you are tech savvy and willing to open the unit, but may give you some hope or point you in the right direction.t

Jul 28, 2010 | Neff Cooktops

2 Answers

Kenmore Elite Induction Cooktop Error Code 41


I realize this is over a year old. I have the same unit with the same error code. Last night, mine made a popping noise followed by smoke and then displayed the 41 and all E's. I pulled the breaker immediately. I'm sure that at least one controller board is toast.
I called Sears and it is under warranty but for parts only, so I guess I will give them a call and schedule the repairman. This should be fun.

Anyone else experienced this failure??

Feb 01, 2009 | Kenmore 42800 Stainless SteelCooktop

3 Answers

Miele KM5753 Induction Cooktop - Error 30


I have a KM5753 with FE31 and it remains after a breaker 1 minute re-set as per instruction booklet - anyone seen that one?

Mar 01, 2008 | Cooktops

Not finding what you are looking for?
Cooktops Logo

Related Topics:

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cooktops Experts

yadayada
yadayada

Level 3 Expert

78936 Answers

Paul Carew

Level 3 Expert

3249 Answers

Brad Brown

Level 3 Expert

17093 Answers

Are you a Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...