Question about Minolta C350 Printer

1 Answer

Misfeed detected but there is no paper jam have removed the paper

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 108 Answers

It is possible that a switch is stuck. Most commonly on that model it is the switch just above the fuser (the hot part of the machine ). This switch can get stuck or knocked completely out of the machine.

Posted on Apr 21, 2015

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 300 Answers

SOURCE: Minolta Di520 false misfeed

Try resetting the copier, with the copier powered on open the front door remove small cover on right hand side press reset button close front door, the machine should boot

Posted on May 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfeed detected. Remove paper indicated by 0


misfeed is different then a jam. jam is the paper hit something miss feed the paper rollers can not pick up the paper. clean the rollers or replace them and or there associated clutches

Feb 21, 2014 | Konica Minolta Bizhub C451...

1 Answer

Misfeed detected


have the rollers been replaced, misfeed means the rollers cant grab the paper not a JAM

Jan 30, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

Kyocera mita km2530 paper misfeed jam00


This usually means that no paper has been fed from the paper cassette or the machine was turned off when you had a paper jam.
Remove the paper cassette from the machine and ensure that nothing is stopping the paper from feeding.Also look into where the machine locates in the copier to ensure that no paper is jammed behind the cassette.
The paper feed rollers may need cleaning or replacing.

Jan 03, 2012 | Kyocera Mita KM-2530 Laser Printer

1 Answer

I have a Sharp Al-2040cs when I turn it on the misfeed indicator is blinking. I checked it there no misfeed paper or piece of paper inside. How can I fix this problem?


The MISFEED Indicator blinks when a MISFEED has occurred. Remove the misfed paper referring to the the description of MISFEED REMOVAL beginning on page 65 of the pdf Manual at:

http://files.sharpusa.com/Downloads/ForHome/HomeOffice/PrintersFaxMachines/Manuals/cop_man_AL2030_AL2040CS.pdf

When the MISFEED Indicator is blinking you should look closer at the paper feed area (see page 66 of the PDF). You may need to remove the paper tray to find any remnants of paper. If after closing the side cover the light does not stop blinking you will need to follow through as per the illustrated instructions.

Remember after removing jammed paper, you need to press the clear key to clear the MISFEED error.

If after doing all this the error signal has not cleared, power down the printer; unplug from the power supply; let rest 5 - 10 minutes; plug back i to power supply; turn printer on and see if this resolves issue.

Trust this is helpful. Please vote. :)


Dec 12, 2010 | Sharp AL2040CS Digital Laser Copier,...

1 Answer

Ricoh Aficio CL3500N printer phantom misfeed


It seems that the sensor is having dust or toner settled upon it. Kindly remove the toner and clean the residual toner. Take a hard stock paper and give one copy command and push it while it tries to pull the paper. Paper misfeed is not the same as paper jam. Paper misfeed refers to the blank paper tray and paper jam refers to paper which has been taken from the tray and now inside the unit.

May 19, 2010 | Ricoh Aficio CL3500N Laser Printer

1 Answer

Misfeed detected but no paper jam


Di 251 is legacy Minolta machine, Minolta is now Konica Minolta

for the image unit try this site


Precision Roller Printer Toner Cartridges Parts and Supplies Office...

as for the adf replace!!! the rollers all three try the same site above

Nov 03, 2009 | Minolta Di251 All-In-One Printer

2 Answers

Paper jam


Hi,

I would like to inform you that this might cause due to dirty paper rollers hence Please click here and follow the instructions to resolve this isse.

May 23, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Sharp al-1631 misfeed light will not go out


This usually happens when a sensor that detected a paper jam has not reset itself after removing the paper. Make sure that when the jam was removed - all the paper came out and there is/was not a small piece missing that could have been left behind in the copier and is hiding somewhere. If you are sure the paper has all been removed then what could have happened is when the jam was being removed it could have caught on one of the paper sensors. This could pull the little flag that activates the sensor out of place - giving a false paper jam message. there are only a handfull of sensors in the paper path. remove the paper tray and make sure there is no paper stuck behind the tray or in the cavity where the tray goes. look and follow very closely the path the paper takes - look for any sensors/flags the paper would avtivate and make sure the flag moves freely and is not lopsided.
Make sure you also try unplugging and replugging the copier from the wall.
Hope this helps

May 19, 2009 | Sharp AL 1631 Copier

2 Answers

Amessage '' misfeed detected'' please remove the .... from 0


before i can help you you need to tell me which brand and model is the machine.
The Message "misfeed detected" means that a paper is bee jammed inside of the copier so you should open some door and remove the paper which has been jammed inside of the copier.
Because of that i need the brand and model of the copier for i to be able to help you and tell you what to do

Jan 29, 2009 | Office Equipment & Supplies

1 Answer

Misfeed indicator light stays on-printer not working


When ever there is a jam be sure to try and remove the jam without tearing the paper. If you do rip the paper piece it back together to assure you removed all of the jam. If there is one tiny scrap left and it lies across a sensor the jam will remain. Easier to happen than you may think.

Senior service tech for 15yrs

Mar 17, 2008 | Sharp AL-1540CS All-In-One Laser Printer

Not finding what you are looking for?
Minolta C350 Printer Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...