Question about Xerox ColorQube 9303 Printer

Open Question

What is the error code 093-563

I've this error code with the message no print no scan. i've restarted the printer, disable alim cable without changes.

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2072 Answers

SOURCE: error code 19,003.48:75856

That is a print head calabration fault. 99 percent chance the print head has failed. That would require replacing hte print head.
That is a common problem on the 8500. Look for a dealer in your area if you want to repair is. Xerox will charge over $200 to show up and $750 for the print head.

Posted on Jan 30, 2009

  • 1 Answer

SOURCE: code 39,003.40:53889

What you can try is shut down the Machine and unplug the powercord and unscrew the cable next to the powercord.
It's from the scanner.
after that reconnect both cable's and turn it back on.

and it should be fixed

Posted on Mar 16, 2009

  • 46 Answers

SOURCE: Error Code: 39,003.40:133671 Yesterday the copier/scanner

this is a scanner problem that can be associated with the scanner lock under the scanner bed. make sure the lock is in the 'unlocked' position. it is easy to move this when lifting the scanner bed to reload the ink blocks. if this does not solve the problem you may have to replace the scanner assembly. hope this helps.

Posted on Aug 19, 2010

kritiko
  • 107 Answers

SOURCE: I`ve bought a new printer

While the printer is on, unplug the power cord from the back of it directly. Plug it back in after 1 minute.

Cheers,

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer is not printing at all - printer was unplugged and restarted - still not printing - receiving above error message.


please write full error message. or check and change your usb cable, check that if there any paper jam in printer, reinstall printer driver, check is printer printing test print from itself.

Mar 14, 2011 | Office Equipment & Supplies

1 Answer

UNABLE TO PRINT DOES NOT RESPOND TO TROUBLE SHOOTING PROVIDED IN USERS GUIDE THIS IS ONLY USED TO COPY AND SCAN & COPY


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41,49 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 24, 2009 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

MFC 5440cnz I get ''unable to clcean message'' have unplugged it and restarted cimouter, but still getting message


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 10, 2009 | Office Equipment & Supplies

1 Answer

I have installed hp photosmart and get an error message '' restart print spooler error 1068'' I have tried everything but cannot restart my printer spooler.


go back to your services where you start the print spooler. open the dependency tab. there it will tell you what other services the print spooler needs to have running. check them and if any are disabled change them to auto and restart them. reboot and you should be OK.

Nov 05, 2009 | HP Photosmart 7450 InkJet Printer

2 Answers

"fatal print spooler error" error message


Completely uninstall the printer driver and install again. If this does not work, there is a corruption in the windows registry or in the print spooler cache files.

For a temporary workaround, disable print spooling. But, if you do, you will need to remember to never close an application you print from until printing is actually finished.

Jun 28, 2009 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

I had a problem with my dell all-in-one photo 924 printer. I decided to delete the Dell AIO 924 driver to fix the problems with printing the docs by getting error message, ? communication not available?...


The problem could be because of ONE out of FIVE problems listed below. Try the steps recommended and it should fix the problem.
Thanks,
Abhishek

Jun 08, 2009 | Dell 924 All-in-One InkJet Printer

1 Answer

No scanning, no printing, no xeroxing


thanks for your answer.now the problem is even bigger.there appears a message saying Port disabled and then Cannot open device.i'll try change the USB cable to see if it helps.
Thank you again!

Sep 25, 2008 | Samsung SCX-4100 All-In-One Laser Printer

5 Answers

Can't scan documents


For the system to work completely; you need the print driver, scan driver and smarthru4.

Once you install the scan driver (available on Samsung website); the issue will go away.

Also, another trick; instead of using the smart thru - which is kind of awkward, download Picasa 3 and if you have installed the scan driver correctly, you can use Picasa to import the scans by controlling the printer. It also allws for some other tweaks that are not so easy to get to in Smart Thru.

In addition to Picasa you can use several other graphic applications to scan the image.

Good luck.

Jul 31, 2008 | Samsung SCX-4100 All-In-One Laser Printer

2 Answers

Error response on hp psc 2355 AllinOne printer,scanner, copier


Issue The product displays an 0x ... error code when printing (for example Error: 0xf0af8004 ). These error codes indicate that the product has an internal condition. Solution Use the instructions below to resolve the issue by restarting the product.
  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer.
If these steps did not resolve the issue, please let me know.


Thank you so much. I Remain


adonscott
HP TECH

Jun 18, 2008 | HP PSC 2355 All-In-One InkJet Printer

16 Answers

Scanning error - cannot scan error code 2,155,0 ???


Hi
I had the same problem, at first I thought that it was the original drivers (the ones I got with the printer) so I donwloaded the drivers from the canon website, this did not resolve the problem. What I also tried and it worked for me was connecting the printer to the computer with it's original usb cable. I bought a couple of weekes ago a usb extension cable (about 5 m long). With this extension cable I can print but I can't scan any document, it just gives me the same error. Hope this works also for you.
Bye
PS: My printer is a Canon Pixma MP190

Sep 21, 2007 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Xerox ColorQube 9303 Printer Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...