Question about HP Office Equipment & Supplies
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your printer is connected in the Network and you are able to print fine than there is no communication Error.
In htan case if you are not able to scan then you need to upgrade the firmware of the printer and install it and i m sure your printer wiill scan scanning on the Network.
Mentioned below is the link to download the latest firmware of the printer.
However before you start sending firmware to the printer you need to make sure that printer driver is installed on the PC.
Thanks and Regards
Posted on Jul 01, 2009
To perform a cold reset
1 Turn the MFP off and then on.
2 When the memory count appears on the control-panel display, press and hold 6 until all three
LEDs flash once and then stay on. This might take up to 20 seconds.
3 Press 3 four times until COLD RESET appears on the control-panel display.
4 Press 6 one time. The MFP continues its initialization sequence.
Posted on May 07, 2010
Tips for a great answer:
Mar 05, 2016 | HP LaserJet Pro 100 color MFP M175nw -...
Jun 18, 2013 | HP LaserJet Pro M1212nf MFP -...
Dec 31, 2012 | HP LASERJET PRO M1132 MFP
Jul 16, 2011 | HP LaserJet M3035 MFP Printer
May 30, 2011 | HP LaserJet M4345 MultiFunction Printer
Dec 16, 2010 | HP LaserJet M1120 MFP All-In-One Printer
Sep 28, 2010 | HP LaserJet M1005 All-In-One Printer
Feb 09, 2010 | HP LaserJet 9500n Printer
Oct 02, 2007 | HP Color LaserJet 9500HDN Printer
37 people viewed this question
Usually answered in minutes!